[Tue May 21 02:55:49 2013] Detection parameters:
  Position = (331.9, 232.0) = 1 50 44.71 -44 30 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 10.9
  Background counts = 22.1
  Rate = 0.002 +/- 0.0004

[Tue May 21 02:55:50 2013] Off-axis axis estimate = 5.39'
[Tue May 21 04:24:19 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Tue May 21 04:24:19 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Tue May 21 04:24:19 2013] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.038
[Tue May 21 04:24:19 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.12"
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src12.ximg exists
[Tue May 21 05:33:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src12.csv
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue May 21 05:33:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src12.csv
[Tue May 21 05:33:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue May 21 05:33:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May 21 05:33:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May 21 05:33:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 06:18:34 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.288310 pixels away
[Tue May 21 06:18:34 2013] Vigneting correction estimate = 1.000000
[Tue May 21 06:18:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 06:18:34 2013] Assessing source extent using major
[Tue May 21 06:18:34 2013] Source does appear to be extended
[Tue May 21 06:18:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 07:22:49 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Tue May 21 07:22:49 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Tue May 21 07:22:49 2013] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.038
[Tue May 21 07:22:49 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.12"
[Tue May 21 08:20:45 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_src12.ximg exists
[Tue May 21 08:20:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_src12.csv
[Tue May 21 08:20:45 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue May 21 08:20:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_src12.csv
[Tue May 21 08:20:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:20:45 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue May 21 08:20:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue May 21 08:20:45 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue May 21 08:20:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue May 21 08:20:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601350101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 09:00:19 2013] Source 29 is offset by -8.511684 and -2.301122 pixels which is larger than
2 X fitted extent = 1.049085 x 1.049085, not incorporating fit results
[Tue May 21 09:00:19 2013] Vigneting correction estimate = 1.000000
[Tue May 21 09:00:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 09:00:19 2013] Assessing source extent using major
[Tue May 21 09:00:19 2013] Source does appear to be extended
[Tue May 21 09:00:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 10:13:43 2013] XMMSAS src. selection expression = ellipse(28824.667480, 20137.375778, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 10:13:43 2013] Writing source region out to fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29_src.reg
[Tue May 21 10:13:43 2013] Extracting stamp from image fullrun_mos1_xmm0601350101_pi300-10000_cl_sm2.00.img.gz, (294, 195) - (369, 270)
[Tue May 21 10:13:43 2013] XMMSAS bgd. selection expression = annulus(28824.667480, 20137.375778, 1087.500000, 2175.000000, X, Y) && !ellipse(29379.329651, 21944.561295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27396.191200, 21255.816020, 352.900810, 352.900810, 0.000000, X, Y)
[Tue May 21 10:13:43 2013] Writing fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29.gif
[Tue May 21 10:16:40 2013] Mean detx,y = (2742.75, -6206.91) 
[Tue May 21 10:16:41 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 10:17:00 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 10:17:00 2013] Setting source spectrum file to fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue May 21 10:17:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue May 21 10:27:42 2013] Not generating rmf since there are only 66 counts
[Tue May 21 10:27:42 2013] rmf not generated due to insufficient counts
[Tue May 21 10:54:32 2013] Updating aperture counts using extracted products
[Tue May 21 10:54:32 2013] Total counts from fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 140.00
[Tue May 21 10:54:32 2013] Total counts from fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 918.00
[Tue May 21 10:54:32 2013] Got source and background scale factors 961008.000000, 8204775.000000
[Tue May 21 10:54:32 2013] User source parameters:
  Position = (331.9, 232.0) = 1 50 44.71 -44 30 34.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.5 +/- 12.9
  Background aperture counts = 107.5
  Rate = 0.0007 +/- 0.0003

[Tue May 21 10:54:32 2013] Updating counts from extracted products
[Tue May 21 10:54:32 2013] Set source signif. to 32.48/10.37 = 3.13
[Tue May 21 10:54:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 10:54:35 2013] Using photon index=1.80, rate=0.000699, arf fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29.arf
[Tue May 21 10:54:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 10:54:35 2013] Updating source flux to 1.1e-14
[Tue May 21 10:54:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 10:54:42 2013] xmm0601350101/analysis//spectral/fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete