[Tue May 21 02:55:49 2013] Detection parameters:
  Position = (294.9, 236.4) = 1 50 59.76 -44 30 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.0 +/- 9.9
  Background counts = 19.6
  Rate = 0.001 +/- 0.0003

[Tue May 21 02:55:50 2013] Off-axis axis estimate = 4.51'
[Tue May 21 04:24:19 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Tue May 21 04:24:19 2013] Initial guess for spatial extent in simple fitting = 8.68"
[Tue May 21 04:24:19 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.642
[Tue May 21 04:24:19 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.68"
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src24.ximg exists
[Tue May 21 05:33:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src24.csv
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue May 21 05:33:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src24.csv
[Tue May 21 05:33:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue May 21 05:33:43 2013] fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue May 21 05:33:43 2013] Fit fullrun_mos1_xmm0601350101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue May 21 06:18:34 2013] Spatial fit model total counts = 277.903000, observed total counts = 260.000000
[Tue May 21 06:18:34 2013] Offset between fit and detection position for source 28 = 0.393542 pixels
[Tue May 21 06:18:34 2013] 279.504900 total counts/ 247.833000 bgd. counts: snr = 2.011845
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.393542 pixels
  Position = (294.9, 236.0) = 1 50 59.73 -44 30 16.9
  Extent = 3.6 (2.5-4.8)", rotation angle = 0
  Source counts = 31.7 +/- 16.7
  Background counts = 247.8
  Rate = 0.0007 +/- 0.0004
[Tue May 21 06:18:34 2013] Vigneting correction estimate = 1.000000
[Tue May 21 06:18:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 06:18:34 2013] Assessing source extent using major axis lower bound
[Tue May 21 06:18:34 2013] Source does appear to be extended
[Tue May 21 06:18:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 07:22:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 07:22:49 2013] Initial guess for spatial extent in simple fitting = 3.57"
[Tue May 21 07:22:49 2013] source mask rpix=0.8, npix_max = 6, mask sum = 2, frac = 0.287
[Tue May 21 07:22:49 2013] Skipping simple spatial due to low active detector fraction
[Tue May 21 09:00:19 2013] Vigneting correction estimate = 1.000000
[Tue May 21 09:00:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 09:00:19 2013] Assessing source extent using major axis lower bound
[Tue May 21 09:00:19 2013] Source does appear to be extended
[Tue May 21 09:00:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 10:13:43 2013] XMMSAS src. selection expression = ellipse(25611.649000, 20481.926200, 214.098006, 214.098006, 0.000000, X, Y)
[Tue May 21 10:13:43 2013] Writing source region out to fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28_src.reg
[Tue May 21 10:13:43 2013] Extracting stamp from image fullrun_mos1_xmm0601350101_pi300-10000_cl_sm2.00.img.gz, (283, 224) - (307, 248)
[Tue May 21 10:13:43 2013] XMMSAS bgd. selection expression = annulus(25611.649000, 20481.926200, 356.830010, 713.660021, X, Y)
[Tue May 21 10:13:43 2013] Writing fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28.gif
[Tue May 21 10:20:21 2013] Mean detx,y = (3683.51, -3248.05) 
[Tue May 21 10:20:22 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 10:20:29 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 10:20:29 2013] Setting source spectrum file to fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue May 21 10:20:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue May 21 10:28:58 2013] Not generating rmf since there are only 31 counts
[Tue May 21 10:28:58 2013] rmf not generated due to insufficient counts
[Tue May 21 10:54:33 2013] Updating aperture counts using extracted products
[Tue May 21 10:54:33 2013] Total counts from fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 41.00
[Tue May 21 10:54:33 2013] Total counts from fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 131.00
[Tue May 21 10:54:33 2013] Got source and background scale factors 120284.000000, 1128140.000000
[Tue May 21 10:54:33 2013] User source parameters:
  Position = (294.9, 236.0) = 1 50 59.73 -44 30 16.9
  Extent = 3.6 (2.5-4.8)", rotation angle = 0
  Source aperture counts = 27.0 +/- 7.5
  Background aperture counts = 14.0
  Rate = 0.0006 +/- 0.0002

[Tue May 21 10:54:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 10:54:35 2013] Using photon index=1.80, rate=0.000682, arf fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28.arf
[Tue May 21 10:54:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 10:54:35 2013] Updating source flux to 1.4e-14
[Tue May 21 10:54:41 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 10:54:42 2013] xmm0601350101/analysis//spectral/fullrun_mos1_xmm0601350101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete