[Mon Dec 19 23:02:55 2011] Detection parameters:
  Position = (287.3, 277.7) = 16 49 55.74 -33 7 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14156.7 +/- 141.3
  Background counts = 43.5
  Rate = 0.5 +/- 0.005

[Mon Dec 19 23:02:56 2011] Off-axis axis estimate = 1.70'
[Mon Dec 19 23:46:23 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 23:46:23 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Dec 19 23:46:23 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Mon Dec 19 23:46:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Dec 20 00:04:12 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 20 00:04:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 00:04:12 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 20 00:04:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 00:04:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 00:04:12 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 20 00:04:12 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 20 00:04:12 2011] Fit fullrun_mos2_xmm0601270401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 20 00:04:24 2011] Spatial fit model total counts = 11447.900000, observed total counts = 11421.000000
[Tue Dec 20 00:04:24 2011] Offset between fit and detection position for source 1 = 0.191040 pixels
[Tue Dec 20 00:04:24 2011] 11504.160000 total counts/ 2566.440000 bgd. counts: snr = 176.425431
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.191040 pixels
  Position = (287.3, 277.5) = 16 49 55.74 -33 7 1.8
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 8937.7 +/- 107.3
  Background counts = 2566.4
  Rate = 0.3 +/- 0.004
[Tue Dec 20 00:04:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 00:04:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 00:04:24 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 00:04:24 2011] Source does appear to be extended
[Tue Dec 20 00:04:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 02:53:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 02:53:22 2011] Initial guess for spatial extent in simple fitting = 5.48"
[Tue Dec 20 02:53:22 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.727
[Tue Dec 20 02:53:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.48"
[Tue Dec 20 03:15:49 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 20 03:15:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 03:15:49 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 20 03:15:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 03:15:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 03:15:50 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 20 03:15:50 2011] fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 20 03:15:50 2011] Fit fullrun_mos2_xmm0601270401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 20 03:15:59 2011] Spatial fit model total counts = 11410.000000, observed total counts = 11420.000000
[Tue Dec 20 03:15:59 2011] Offset between fit and detection position for source 1 = 0.011273 pixels
[Tue Dec 20 03:15:59 2011] 11501.180000 total counts/ 2547.910000 bgd. counts: snr = 177.373869
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011273 pixels
  Position = (287.3, 277.5) = 16 49 55.74 -33 7 1.8
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 8953.3 +/- 107.2
  Background counts = 2547.9
  Rate = 0.3 +/- 0.004
[Tue Dec 20 03:15:59 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 03:15:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 03:15:59 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 03:15:59 2011] Source does appear to be extended
[Tue Dec 20 03:15:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 04:44:38 2011] Counts = 8953.270000, rescaling region sizes by 2.000000
[Tue Dec 20 04:44:38 2011] XMMSAS src. selection expression = ellipse(24949.236200, 24097.006400, 662.391619, 662.391619, 0.000000, X, Y)
[Tue Dec 20 04:44:38 2011] Writing source region out to fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 20 04:44:38 2011] Extracting stamp from image fullrun_mos2_xmm0601270401_pi300-10000_cl_sm2.00.img.gz, (249, 239) - (325, 316)
[Tue Dec 20 04:44:38 2011] XMMSAS bgd. selection expression = annulus(24949.236200, 24097.006400, 2207.972064, 4415.944127, X, Y)
[Tue Dec 20 04:44:38 2011] Writing fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1.gif
[Tue Dec 20 04:44:45 2011] Mean detx,y = (88.87, 107.77) 
[Tue Dec 20 04:44:47 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 04:45:10 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 04:45:11 2011] Setting source spectrum file to fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 20 04:45:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 20 04:52:42 2011] Updating aperture counts using extracted products
[Tue Dec 20 04:52:42 2011] Error reading totcts from fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 20 04:52:42 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 04:52:42 2011] Using photon index=1.80, rate=0.319, arf fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1.arf
[Tue Dec 20 04:52:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 04:52:42 2011] Updating source flux to 3.4e-12
[Tue Dec 20 04:53:46 2011] Reading fit data from xmm0601270401/analysis//spectral/fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Dec 20 04:53:46 2011] Spectral fit parameter nH value = 1.31966e+21
[Tue Dec 20 04:53:46 2011] Spectral fit parameter PhoIndex value = 0.653492
[Tue Dec 20 04:53:46 2011] Failed to get F(0.3-8.0) from xmm0601270401/analysis//spectral/fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Dec 20 04:53:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 04:53:46 2011] Using Nh = 1.3e+21, photon index=0.65, rate=0.319, arf fullrun_mos2_xmm0601270401_pi300-10000_pass1_cl_src1.arf
[Tue Dec 20 04:53:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 04:53:46 2011] Updating source flux to 6.9e-12