[Mon Dec 19 23:02:29 2011] Detection parameters:
  Position = (193.5, 387.0) = 16 50 28.17 -32 59 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.2 +/- 16.6
  Background counts = 42.1
  Rate = 0.004 +/- 0.0005

[Mon Dec 19 23:02:29 2011] Off-axis axis estimate = 9.95'
[Mon Dec 19 23:32:08 2011] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 23:32:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 23:32:08 2011] Initial guess for spatial extent in simple fitting = 11.41"
[Mon Dec 19 23:32:08 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.077
[Mon Dec 19 23:32:08 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.41"
[Mon Dec 19 23:46:23 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Dec 19 23:46:23 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Dec 19 23:46:23 2011] Fit fullrun_mos1_xmm0601270401_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Dec 19 23:46:23 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Dec 19 23:46:23 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Dec 19 23:46:23 2011] Fit fullrun_mos1_xmm0601270401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Dec 20 00:04:20 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.751460 pixels away
[Tue Dec 20 00:04:21 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 00:04:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 00:04:21 2011] Assessing source extent using major
[Tue Dec 20 00:04:21 2011] Source does appear to be extended
[Tue Dec 20 00:04:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 00:23:21 2011] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 00:23:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 00:23:21 2011] Initial guess for spatial extent in simple fitting = 11.41"
[Tue Dec 20 00:23:21 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.077
[Tue Dec 20 00:23:21 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.41"
[Tue Dec 20 02:53:21 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_src2.ximg exists
[Tue Dec 20 02:53:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_src2.csv
[Tue Dec 20 02:53:21 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Dec 20 02:53:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_src2.csv
[Tue Dec 20 02:53:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 02:53:22 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Dec 20 02:53:22 2011] fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Dec 20 02:53:22 2011] Fit fullrun_mos1_xmm0601270401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Dec 20 03:15:57 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.751460 pixels away
[Tue Dec 20 03:15:57 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 03:15:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 03:15:57 2011] Assessing source extent using major
[Tue Dec 20 03:15:57 2011] Source does appear to be extended
[Tue Dec 20 03:15:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 04:34:26 2011] XMMSAS src. selection expression = ellipse(16786.102219, 33617.539642, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 20 04:34:26 2011] Writing source region out to fullrun_mos1_xmm0601270401_pi300-10000_pass1_cl_src6_src.reg
[Tue Dec 20 04:34:26 2011] Extracting stamp from image fullrun_mos1_xmm0601270401_pi300-10000_cl_sm2.00.img.gz, (156, 349) - (231, 424)
[Tue Dec 20 04:34:26 2011] XMMSAS bgd. selection expression = annulus(16786.102219, 33617.539642, 1087.500000, 2175.000000, X, Y)
[Tue Dec 20 04:34:26 2011] Writing fullrun_mos1_xmm0601270401_pi300-10000_pass1_cl_src6.gif
[Tue Dec 20 04:35:10 2011] Mean detx,y = (-9831.10, 7068.52) 
[Tue Dec 20 04:35:12 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 04:35:44 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 04:35:44 2011] Setting source spectrum file to fullrun_mos1_xmm0601270401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Dec 20 04:35:44 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601270401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Dec 20 04:44:25 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 20 04:44:25 2011] rmf not generated due to insufficient counts
[Tue Dec 20 04:52:41 2011] Updating aperture counts using extracted products
[Tue Dec 20 04:52:41 2011] Error reading totcts from fullrun_mos1_xmm0601270401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Dec 20 04:52:42 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 04:52:42 2011] Using photon index=1.80, rate=0.00419, arf fullrun_mos1_xmm0601270401_pi300-10000_pass1_cl_src6.arf
[Tue Dec 20 04:52:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 04:52:42 2011] Updating source flux to 7.3e-14
[Tue Dec 20 04:52:43 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting