[Mon Aug 13 20:36:51 2012] Detection parameters:
  Position = (313.0, 318.2) = 18 17 22.23 -25 8 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12280.5 +/- 131.8
  Background counts = 25.9
  Rate = 0.3 +/- 0.004

[Mon Aug 13 20:36:52 2012] Off-axis axis estimate = 1.78'
[Mon Aug 13 22:38:23 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:38:23 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Mon Aug 13 22:38:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Mon Aug 13 22:38:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 13 23:24:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 13 23:24:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 23:24:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 13 23:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 13 23:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Aug 13 23:24:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 23:25:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.664319 pixels away
[Mon Aug 13 23:25:04 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 23:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 23:25:04 2012] Assessing source extent using major
[Mon Aug 13 23:25:04 2012] Source does appear to be extended
[Mon Aug 13 23:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 00:55:33 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:55:33 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Aug 14 00:55:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Aug 14 00:55:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.32"
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 01:29:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 14 01:29:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:30:06 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.020214 pixels away
[Tue Aug 14 01:30:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:30:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:30:06 2012] Assessing source extent using major
[Tue Aug 14 01:30:06 2012] Source does appear to be extended
[Tue Aug 14 01:30:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 03:18:12 2012] Counts = 12280.462891, rescaling region sizes by 3.000000
[Tue Aug 14 03:18:12 2012] XMMSAS src. selection expression = ellipse(27186.617950, 27637.293243, 1957.500000, 1957.500000, 0.000000, X, Y)
[Tue Aug 14 03:18:12 2012] Writing source region out to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4_src.reg
[Tue Aug 14 03:18:12 2012] Extracting stamp from image fullrun_mos2_xmm0601270301_pi300-10000_cl_sm2.00.img.gz, (201, 206) - (426, 431)
[Tue Aug 14 03:18:12 2012] XMMSAS bgd. selection expression = annulus(27186.617950, 27637.293243, 9787.500000, 19575.000000, X, Y) && !ellipse(43242.308460, 25432.685600, 429.375212, 429.375212, 0.000000, X, Y) && !ellipse(32989.821200, 22223.417800, 301.896009, 301.896009, 0.000000, X, Y) && !ellipse(14641.572662, 20376.600555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30162.260000, 14337.077400, 411.246412, 411.246412, 0.000000, X, Y) && !ellipse(27749.834625, 28060.812897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37848.950104, 33251.312866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23922.910400, 22289.856800, 273.714408, 273.714408, 0.000000, X, Y) && !ellipse(30951.837128, 14671.895752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35975.232480, 23509.457640, 592.577617, 592.577617, 0.000000, X, Y) && !ellipse(24004.658264, 33736.861969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21362.884920, 34684.400400, 495.328014, 495.328014, 0.000000, X, Y) && !ellipse(37653.440100, 19374.570400, 399.876812, 399.876812, 0.000000, X, Y) && !ellipse(31722.309000, 25650.020000, 397.424288, 397.424288, 0.000000, X, Y) && !ellipse(19596.158676, 41748.824402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17506.476000, 20315.025800, 658.010419, 263.736008, 27.250118, X, Y) && !ellipse(38538.542800, 18272.404600, 589.163217, 182.436805, 123.927145, X, Y) && !ellipse(27099.917440, 32043.794000, 300.878409, 300.878409, 0.000000, X, Y) && !ellipse(32007.324400, 23329.623400, 334.871210, 334.871210, 0.000000, X, Y) && !ellipse(35046.760498, 23407.024445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13630.365826, 26189.993856, 833.058517, 261.512952, 298.082522, X, Y) && !ellipse(15631.076859, 34774.184570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37461.826720, 36659.345200, 494.420014, 494.420014, 0.000000, X, Y) && !ellipse(27962.193100, 21293.568000, 694.748820, 694.748820, 0.000000, X, Y) && !ellipse(34713.663177, 42516.005737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.436600, 38844.611600, 576.269617, 576.269617, 0.000000, X, Y) && !ellipse(26591.224060, 39346.972400, 690.535220, 690.535220, 0.000000, X, Y) && !ellipse(11119.195740, 22136.016785, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 03:18:12 2012] Writing fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4.gif
[Tue Aug 14 03:18:19 2012] Mean detx,y = (11.20, 147.41) 
[Tue Aug 14 03:18:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 03:26:27 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 03:26:27 2012] Setting source spectrum file to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Aug 14 03:26:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Aug 14 03:34:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 03:34:15 2012] rmf not generated due to insufficient counts
[Tue Aug 14 03:49:27 2012] Updating aperture counts using extracted products
[Tue Aug 14 03:49:27 2012] Error reading totcts from fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Aug 14 03:49:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 03:49:27 2012] Using photon index=1.80, rate=0.349, arf fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4.arf
[Tue Aug 14 03:49:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 03:49:27 2012] Updating source flux to 3e-12
[Tue Aug 14 03:50:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 14 03:50:20 2012] xmm0601270301/analysis//spectral/fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete