[Mon Aug 13 20:36:51 2012] Detection parameters:
  Position = (380.1, 256.1) = 18 17 0.74 -25 13 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 598.5 +/- 29.9
  Background counts = 20.0
  Rate = 0.03 +/- 0.001

[Mon Aug 13 20:36:52 2012] Off-axis axis estimate = 6.67'
[Mon Aug 13 22:38:23 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:38:23 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Mon Aug 13 22:38:23 2012] source mask rpix=2.2, npix_max = 30, mask sum = 33, frac = 1.095
[Mon Aug 13 22:38:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.76"
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 13 23:24:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src3.csv
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 13 23:24:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src3.csv
[Mon Aug 13 23:24:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 13 23:24:43 2012] Fit fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 13 23:25:04 2012] Spatial fit model total counts = 726.552000, observed total counts = 724.000000
[Mon Aug 13 23:25:04 2012] Offset between fit and detection position for source 2 = 0.318386 pixels
[Mon Aug 13 23:25:04 2012] 723.133000 total counts/ 357.524000 bgd. counts: snr = 19.335895
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.318386 pixels
  Position = (379.7, 256.0) = 18 17 0.84 -25 13 13.8
  Extent = 3.8 (3.4-4.1)", rotation angle = 0
  Source counts = 365.6 +/- 26.9
  Background counts = 357.5
  Rate = 0.01 +/- 0.0007
[Mon Aug 13 23:25:04 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 23:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 23:25:04 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 23:25:04 2012] Source does appear to be extended
[Mon Aug 13 23:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 00:55:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:55:33 2012] Initial guess for spatial extent in simple fitting = 3.79"
[Tue Aug 14 00:55:33 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.797
[Tue Aug 14 00:55:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.79"
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src3.csv
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src3.csv
[Tue Aug 14 01:29:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 14 01:29:49 2012] Fit fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug 14 01:30:06 2012] Spatial fit model total counts = 726.967000, observed total counts = 724.000000
[Tue Aug 14 01:30:06 2012] Offset between fit and detection position for source 2 = 0.001040 pixels
[Tue Aug 14 01:30:06 2012] 723.559000 total counts/ 358.625000 bgd. counts: snr = 19.270547
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001040 pixels
  Position = (379.8, 256.0) = 18 17 0.84 -25 13 13.8
  Extent = 3.8 (3.4-4.1)", rotation angle = 0
  Source counts = 364.9 +/- 26.9
  Background counts = 358.6
  Rate = 0.01 +/- 0.0007
[Tue Aug 14 01:30:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:30:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:30:06 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 01:30:06 2012] Source does appear to be extended
[Tue Aug 14 01:30:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 03:18:12 2012] XMMSAS src. selection expression = ellipse(32989.821200, 22223.417800, 226.422007, 226.422007, 0.000000, X, Y)
[Tue Aug 14 03:18:12 2012] Writing source region out to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 14 03:18:12 2012] Extracting stamp from image fullrun_mos2_xmm0601270301_pi300-10000_cl_sm2.00.img.gz, (367, 243) - (393, 269)
[Tue Aug 14 03:18:12 2012] XMMSAS bgd. selection expression = annulus(32989.821200, 22223.417800, 377.370011, 754.740022, X, Y)
[Tue Aug 14 03:18:12 2012] Writing fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src2.gif
[Tue Aug 14 03:26:43 2012] Mean detx,y = (-6038.58, -4995.90) 
[Tue Aug 14 03:26:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 03:26:54 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 03:26:54 2012] Setting source spectrum file to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 03:26:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 14 03:49:27 2012] Updating aperture counts using extracted products
[Tue Aug 14 03:49:27 2012] Error reading totcts from fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 03:49:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 03:49:27 2012] Using photon index=1.80, rate=0.00997, arf fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src2.arf
[Tue Aug 14 03:49:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 03:49:27 2012] Updating source flux to 1.8e-13