[Mon Aug 13 20:36:51 2012] Detection parameters:
  Position = (498.0, 292.9) = 18 16 22.98 -25 10 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 978.9 +/- 38.7
  Background counts = 18.6
  Rate = 0.03 +/- 0.001

[Mon Aug 13 20:36:52 2012] Off-axis axis estimate = 14.47'
[Mon Aug 13 22:38:23 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:38:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 22:38:23 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Mon Aug 13 22:38:23 2012] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.207
[Mon Aug 13 22:38:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.66"
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src2.ximg exists
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Aug 13 23:24:43 2012] Fit fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Aug 13 23:24:43 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Aug 13 23:24:43 2012] Fit fullrun_mos2_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Aug 13 23:25:04 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.869815 pixels away
[Mon Aug 13 23:25:04 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 23:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 23:25:04 2012] Assessing source extent using major
[Mon Aug 13 23:25:04 2012] Source does appear to be extended
[Mon Aug 13 23:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 00:55:33 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:55:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 00:55:33 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Tue Aug 14 00:55:33 2012] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.207
[Tue Aug 14 00:55:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.66"
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src2.csv
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Aug 14 01:29:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src2.csv
[Tue Aug 14 01:29:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Aug 14 01:29:49 2012] fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Aug 14 01:29:49 2012] Fit fullrun_mos2_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Aug 14 01:30:06 2012] Spatial fit model total counts = 1059.000000, observed total counts = 1059.000000
[Tue Aug 14 01:30:06 2012] Offset between fit and detection position for source 1 = 0.359083 pixels
[Tue Aug 14 01:30:06 2012] 1060.103000 total counts/ 447.735000 bgd. counts: snr = 28.940229
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.359083 pixels
  Position = (497.6, 292.9) = 18 16 23.09 -25 10 32.6
  Extent = 5.4 (5.0-5.8)", rotation angle = 0
  Source counts = 612.4 +/- 32.6
  Background counts = 447.7
  Rate = 0.02 +/- 0.0009
[Tue Aug 14 01:30:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:30:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:30:06 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 01:30:06 2012] Source does appear to be extended
[Tue Aug 14 01:30:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 03:18:12 2012] XMMSAS src. selection expression = ellipse(43242.308460, 25432.685600, 322.031409, 322.031409, 0.000000, X, Y)
[Tue Aug 14 03:18:12 2012] Writing source region out to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 03:18:12 2012] Extracting stamp from image fullrun_mos2_xmm0601270301_pi300-10000_cl_sm2.00.img.gz, (479, 274) - (516, 311)
[Tue Aug 14 03:18:12 2012] XMMSAS bgd. selection expression = annulus(43242.308460, 25432.685600, 536.719015, 1073.438031, X, Y)
[Tue Aug 14 03:18:12 2012] Writing fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 03:26:30 2012] Mean detx,y = (-16142.93, -1329.67) 
[Tue Aug 14 03:26:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 03:26:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 03:26:40 2012] Setting source spectrum file to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 03:26:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 03:49:27 2012] Updating aperture counts using extracted products
[Tue Aug 14 03:49:27 2012] Error reading totcts from fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 03:49:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 03:49:27 2012] Using photon index=1.80, rate=0.0167, arf fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 03:49:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 03:49:27 2012] Updating source flux to 5.2e-13
[Tue Aug 14 03:50:20 2012] Reading fit data from xmm0601270301/analysis//spectral/fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 03:50:20 2012] Spectral fit parameter nH value = 2.83857e+21
[Tue Aug 14 03:50:20 2012] Spectral fit parameter PhoIndex value = 1.10979
[Tue Aug 14 03:50:20 2012] Failed to get F(0.3-8.0) from xmm0601270301/analysis//spectral/fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 03:50:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 03:50:20 2012] Using Nh = 2.8e+21, photon index=1.11, rate=0.0167, arf fullrun_mos2_xmm0601270301_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 03:50:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 03:50:20 2012] Updating source flux to 9.5e-13