[Mon Aug 13 20:36:27 2012] Detection parameters:
  Position = (277.0, 387.3) = 18 17 33.78 -25 3 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.2 +/- 11.9
  Background counts = 22.2
  Rate = 0.003 +/- 0.0005

[Mon Aug 13 20:36:27 2012] Off-axis axis estimate = 6.63'
[Mon Aug 13 22:06:36 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 22:06:36 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Mon Aug 13 22:06:36 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.999
[Mon Aug 13 22:06:36 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.74"
[Mon Aug 13 22:38:23 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_src7.ximg exists
[Mon Aug 13 22:38:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_src7.csv
[Mon Aug 13 22:38:23 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Aug 13 22:38:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_src7.csv
[Mon Aug 13 22:38:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 22:38:23 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Aug 13 22:38:23 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Aug 13 22:38:23 2012] Fit fullrun_mos1_xmm0601270301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Aug 13 23:24:59 2012] Spatial fit model total counts = 290.761000, observed total counts = 268.000000
[Mon Aug 13 23:24:59 2012] Offset between fit and detection position for source 10 = 0.780383 pixels
[Mon Aug 13 23:24:59 2012] 286.254600 total counts/ 235.000000 bgd. counts: snr = 3.343481
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.780383 pixels
  Position = (276.8, 388.1) = 18 17 33.85 -25 3 39.4
  Extent = 4.1 (3.2-5.5)", rotation angle = 0
  Source counts = 51.3 +/- 16.9
  Background counts = 235.0
  Rate = 0.001 +/- 0.0005
[Mon Aug 13 23:24:59 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 23:24:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 23:24:59 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 23:24:59 2012] Source does appear to be extended
[Mon Aug 13 23:24:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 00:32:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:32:15 2012] Initial guess for spatial extent in simple fitting = 4.06"
[Tue Aug 14 00:32:15 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.094
[Tue Aug 14 00:32:15 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.06"
[Tue Aug 14 00:55:32 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Aug 14 00:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_src7.csv
[Tue Aug 14 00:55:32 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Aug 14 00:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_src7.csv
[Tue Aug 14 00:55:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 00:55:32 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Aug 14 00:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Aug 14 00:55:32 2012] fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Aug 14 00:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Aug 14 00:55:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 01:30:02 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Tue Aug 14 01:30:02 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 01:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 01:30:02 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 01:30:02 2012] Source does appear to be extended
[Tue Aug 14 01:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 02:58:16 2012] XMMSAS src. selection expression = ellipse(24030.314200, 33713.313060, 243.840607, 243.840607, 0.000000, X, Y)
[Tue Aug 14 02:58:16 2012] Writing source region out to fullrun_mos1_xmm0601270301_pi300-10000_pass1_cl_src10_src.reg
[Tue Aug 14 02:58:16 2012] Extracting stamp from image fullrun_mos1_xmm0601270301_pi300-10000_cl_sm2.00.img.gz, (263, 374) - (291, 402)
[Tue Aug 14 02:58:16 2012] XMMSAS bgd. selection expression = annulus(24030.314200, 33713.313060, 406.401012, 812.802023, X, Y)
[Tue Aug 14 02:58:16 2012] Writing fullrun_mos1_xmm0601270301_pi300-10000_pass1_cl_src10.gif
[Tue Aug 14 02:59:46 2012] Mean detx,y = (6299.72, -3562.36) 
[Tue Aug 14 02:59:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 02:59:55 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 02:59:55 2012] Setting source spectrum file to fullrun_mos1_xmm0601270301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug 14 02:59:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601270301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Aug 14 03:16:45 2012] Not generating rmf since there are only 51 counts
[Tue Aug 14 03:16:45 2012] rmf not generated due to insufficient counts
[Tue Aug 14 03:49:26 2012] Updating aperture counts using extracted products
[Tue Aug 14 03:49:26 2012] Error reading totcts from fullrun_mos1_xmm0601270301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Aug 14 03:49:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 03:49:27 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0601270301_pi300-10000_pass1_cl_src10.arf
[Tue Aug 14 03:49:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 03:49:27 2012] Updating source flux to 2.5e-14
[Tue Aug 14 03:49:29 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting