[Wed May 23 20:54:16 2012] Detection parameters: Position = (312.9, 249.0) = 17 19 35.52 -41 5 57.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 425.6 +/- 29.2 Background counts = 52.4 Rate = 0.02 +/- 0.001 [Wed May 23 20:54:17 2012] Off-axis axis estimate = 3.74' [Wed May 23 20:58:34 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting [Wed May 23 20:58:34 2012] Initial guess for spatial extent in simple fitting = 8.30" [Wed May 23 20:58:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863 [Wed May 23 20:58:34 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.30" [Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src32.ximg exists [Wed May 23 23:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src32.csv [Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src32_1.ximg exists [Wed May 23 23:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src32.csv [Wed May 23 23:05:07 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Wed May 23 23:05:07 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly [Thu May 24 00:39:22 2012] Source 32 is offset by -7.583557 and 1.423416 pixels which is larger than 2 X fitted extent = 7.470207 x 7.470207, not incorporating fit results [Thu May 24 00:39:22 2012] Spatial fit model total counts = 1634.690000, observed total counts = 1634.000000 [Thu May 24 00:39:22 2012] Offset between fit and detection position for source 32 = 2.338312 pixels [Thu May 24 00:39:22 2012] 942.690000 total counts/ 552.467000 bgd. counts: snr = 16.601973 Spatial fit parameters: Offset between fit and detection position for source 32 = 2.338312 pixels Position = (313.1, 251.3) = 17 19 35.45 -41 5 46.1 Extent = 8.0 (7.2-9.1)", rotation angle = 0 Source counts = 390.2 +/- 30.7 Background counts = 552.5 Rate = 0.01 +/- 0.001 [Thu May 24 00:39:22 2012] Vigneting correction estimate = 1.000000 [Thu May 24 00:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 24 00:39:22 2012] Assessing source extent using major axis lower bound [Thu May 24 00:39:22 2012] Source does appear to be extended [Thu May 24 00:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 24 00:39:22 2012] Source is confused with source 29 [Thu May 24 00:39:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 24 00:39:38 2012] Initial guess for spatial extent in simple fitting = 8.03" [Thu May 24 00:39:38 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.909 [Thu May 24 00:39:38 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.03" [Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src26.ximg exists [Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src26_1.ximg exists [Thu May 24 02:04:24 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src26 appears to have run properly [Thu May 24 02:04:25 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Thu May 24 02:04:25 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Thu May 24 02:04:25 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly [Thu May 24 03:03:03 2012] Spatial fit model total counts = 1607.670000, observed total counts = 1607.000000 [Thu May 24 03:03:03 2012] Offset between fit and detection position for source 32 = 1.162518 pixels [Thu May 24 03:03:03 2012] 1275.295000 total counts/ 704.578000 bgd. counts: snr = 21.500882 Spatial fit parameters: Offset between fit and detection position for source 32 = 1.162518 pixels Position = (313.1, 252.4) = 17 19 35.46 -41 5 41.1 Extent = 16.1 (15.4-32.1)" x 4.8 (4.0-5.5)", rotation angle = 89 (86-90) degrees Source counts = 570.7 +/- 35.7 Background counts = 704.6 Rate = 0.02 +/- 0.001 [Thu May 24 03:03:03 2012] Vigneting correction estimate = 1.000000 [Thu May 24 03:03:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 24 03:03:03 2012] Assessing source extent using major axis lower bound [Thu May 24 03:03:03 2012] Source does appear to be extended [Thu May 24 03:03:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.79 [Thu May 24 03:03:03 2012] Source is asymmetric [Thu May 24 03:03:15 2012] XMMSAS src. selection expression = ellipse(27187.018920, 21914.294400, 963.342028, 285.110408, 88.827000, X, Y) [Thu May 24 03:03:15 2012] Writing source region out to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src32_src.reg [Thu May 24 03:03:15 2012] Extracting stamp from image fullrun_pn_xmm0601270201_pi300-10000_cl_sm2.00.img.gz, (258, 197) - (368, 308) [Thu May 24 03:03:15 2012] XMMSAS bgd. selection expression = annulus(27187.018920, 21914.294400, 1605.570046, 3211.140092, X, Y) && !ellipse(25636.390000, 25618.518000, 1039.968030, 1039.968030, 0.000000, X, Y) && !ellipse(27111.620640, 25621.878000, 1119.744032, 1119.744032, 0.000000, X, Y) && !ellipse(29565.760498, 24122.416779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.879600, 24029.574000, 1596.456046, 417.988012, 89.014000, X, Y) && !ellipse(27132.861572, 23703.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.728943, 22656.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27184.041840, 22275.474800, 1299.816037, 415.436812, 86.875000, X, Y) && !ellipse(27224.735400, 21020.111200, 609.536018, 609.536018, 0.000000, X, Y) && !ellipse(27225.442600, 20939.339800, 737.284021, 737.284021, 0.000000, X, Y) && !ellipse(27241.555817, 19262.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.055089, 18493.211167, 1577.824045, 642.987860, 86.144214, X, Y) && !ellipse(27279.139960, 17663.724000, 1577.824045, 383.520811, 87.862580, X, Y) && !ellipse(27277.761780, 17320.774000, 1641.008047, 294.852008, 89.454824, X, Y) [Thu May 24 03:03:15 2012] Writing fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src32.gif [Thu May 24 03:24:20 2012] Mean detx,y = (134.09, 5499.22) [Thu May 24 03:24:24 2012] Setting backscal keywords in source and bgd. spectrum [Thu May 24 03:25:05 2012] Binned source spectrum to 10 counts/bin [Thu May 24 03:25:06 2012] Setting source spectrum file to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Thu May 24 03:25:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src32_bgd.pi.gz [Thu May 24 05:46:59 2012] Updating aperture counts using extracted products [Thu May 24 05:46:59 2012] Error reading totcts from fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Thu May 24 05:46:59 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 24 05:46:59 2012] Using photon index=1.80, rate=0.0178, arf fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src32.arf [Thu May 24 05:46:59 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 24 05:46:59 2012] Updating source flux to 6.7e-14 [Thu May 24 05:48:02 2012] Flag b found in src. 32 procflags, skipping spectral fitting [Thu May 24 05:48:02 2012] Flag c found in src. 32 procflags, skipping spectral fitting