[Wed May 23 20:54:15 2012] Detection parameters:
  Position = (312.0, 318.9) = 17 19 35.88 -41 0 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203217.4 +/- 511.8
  Background counts = 65.8
  Rate = 8 +/- 0.02

[Wed May 23 20:54:17 2012] Off-axis axis estimate = 1.78'
[Wed May 23 20:58:34 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:58:34 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed May 23 20:58:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed May 23 20:58:34 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.32"
[Wed May 23 23:05:06 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 23 23:05:06 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 23 23:05:06 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 23 23:05:07 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 24 00:39:22 2012] Spatial fit model total counts = 176264.000000, observed total counts = 181152.000000
[Thu May 24 00:39:22 2012] Offset between fit and detection position for source 2 = 0.174550 pixels
[Thu May 24 00:39:22 2012] 176432.000000 total counts/ 25600.000000 bgd. counts: snr = 942.700000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.174550 pixels
  Position = (311.8, 318.8) = 17 19 35.93 -41 0 52.6
  Extent = 6.5 (6.4-6.5)" x 6.3 (6.2-6.3)", rotation angle = 356 (350-0) degrees
  Source counts = 150832.0 +/- 420.0
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Thu May 24 00:39:22 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:22 2012] Assessing source extent using major axis lower bound
[Thu May 24 00:39:22 2012] Source does appear to be extended
[Thu May 24 00:39:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Thu May 24 00:39:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 00:39:38 2012] Initial guess for spatial extent in simple fitting = 6.37"
[Thu May 24 00:39:38 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.038
[Thu May 24 00:39:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.37"
[Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 24 02:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src2.csv
[Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 24 02:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src2.csv
[Thu May 24 02:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 24 02:04:24 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 24 03:03:03 2012] Spatial fit model total counts = 176461.000000, observed total counts = 180473.000000
[Thu May 24 03:03:03 2012] Offset between fit and detection position for source 2 = 0.010508 pixels
[Thu May 24 03:03:03 2012] 176264.000000 total counts/ 25600.000000 bgd. counts: snr = 941.650000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010508 pixels
  Position = (311.8, 318.8) = 17 19 35.93 -41 0 52.6
  Extent = 6.4 (6.3-6.4)", rotation angle = 0
  Source counts = 150664.0 +/- 419.8
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Thu May 24 03:03:03 2012] Vigneting correction estimate = 1.000000
[Thu May 24 03:03:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 03:03:03 2012] Assessing source extent using major axis lower bound
[Thu May 24 03:03:03 2012] Source does appear to be extended
[Thu May 24 03:03:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 03:03:14 2012] Counts = 150664.000000, rescaling region sizes by 3.000000
[Thu May 24 03:03:14 2012] XMMSAS src. selection expression = ellipse(27081.318440, 27684.136400, 1144.153833, 1144.153833, 0.000000, X, Y)
[Thu May 24 03:03:14 2012] Writing source region out to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src2_src.reg
[Thu May 24 03:03:14 2012] Extracting stamp from image fullrun_pn_xmm0601270201_pi300-10000_cl_sm2.00.img.gz, (246, 253) - (378, 385)
[Thu May 24 03:03:14 2012] XMMSAS bgd. selection expression = annulus(27081.318440, 27684.136400, 5720.769165, 11441.538329, X, Y) && !ellipse(16567.111420, 39919.575592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29125.970825, 34057.963867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33774.414600, 31790.301340, 436.851213, 436.851213, 0.000000, X, Y) && !ellipse(31949.714200, 29328.582000, 370.890526, 370.890526, 0.000000, X, Y) && !ellipse(27880.687744, 28966.185852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.672516, 28911.752441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.845337, 28910.602814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21506.155000, 27206.269600, 413.370412, 413.370412, 0.000000, X, Y) && !ellipse(21948.727140, 26572.253400, 403.618412, 403.618412, 0.000000, X, Y) && !ellipse(19691.492813, 25548.804718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.390000, 25618.518000, 1039.968030, 1039.968030, 0.000000, X, Y) && !ellipse(27111.620640, 25621.878000, 1119.744032, 1119.744032, 0.000000, X, Y) && !ellipse(29565.760498, 24122.416779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.879600, 24029.574000, 1596.456046, 417.988012, 89.014000, X, Y) && !ellipse(27132.861572, 23703.007111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38187.415894, 22761.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.728943, 22656.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27184.041840, 22275.474800, 1299.816037, 415.436812, 86.875000, X, Y) && !ellipse(16792.268524, 21712.983002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.018920, 21914.294400, 1284.456037, 380.147211, 88.827000, X, Y) && !ellipse(38753.956665, 21545.353745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.735400, 21020.111200, 609.536018, 609.536018, 0.000000, X, Y) && !ellipse(27225.442600, 20939.339800, 737.284021, 737.284021, 0.000000, X, Y) && !ellipse(27241.555817, 19262.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.055089, 18493.211167, 1577.824045, 642.987860, 86.144214, X, Y) && !ellipse(27279.139960, 17663.724000, 1577.824045, 383.520811, 87.862580, X, Y) && !ellipse(27277.761780, 17320.774000, 1641.008047, 294.852008, 89.454824, X, Y) && !ellipse(27282.633329, 17001.108927, 1641.008047, 315.696400, 89.555287, X, Y) && !ellipse(27286.619844, 16612.154298, 1669.808048, 353.118107, 88.941435, X, Y) && !ellipse(27308.380800, 15516.006800, 864.416025, 864.416025, 0.000000, X, Y)
[Thu May 24 03:03:14 2012] Writing fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src2.gif
[Thu May 24 03:04:18 2012] Mean detx,y = (142.82, -256.58) 
[Thu May 24 03:04:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 03:08:15 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 03:08:15 2012] Setting source spectrum file to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 03:08:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 24 05:46:58 2012] Updating aperture counts using extracted products
[Thu May 24 05:46:58 2012] Error reading totcts from fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 05:46:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 05:46:59 2012] Using photon index=1.80, rate=4.7, arf fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src2.arf
[Thu May 24 05:46:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 05:46:59 2012] Updating source flux to 1.1e-11