[Wed May 23 20:54:15 2012] Detection parameters:
  Position = (303.0, 332.9) = 17 19 39.31 -40 59 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.4 +/- 25.0
  Background counts = 61.0
  Rate = 0.007 +/- 0.001

[Wed May 23 20:54:17 2012] Off-axis axis estimate = 2.52'
[Wed May 23 20:58:34 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:58:34 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed May 23 20:58:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Wed May 23 20:58:34 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.69"
[Wed May 23 23:05:06 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 23 23:05:06 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 23 23:05:06 2012] Fit fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_src17 appears to have run properly
[Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 23 23:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 23 23:05:07 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 23 23:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 23 23:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 00:39:22 2012] Source 17 is offset by 1.151075 and -4.807722 pixels which is larger than
2 X fitted extent = 0.891170 x 1.833846, not incorporating fit results
[Thu May 24 00:39:22 2012] Source 17 is offset by 7.107533 and 4.961224 pixels which is larger than
2 X fitted extent = 0.883637 x 0.883637, not incorporating fit results
[Thu May 24 00:39:22 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:22 2012] Assessing source extent using major
[Thu May 24 00:39:22 2012] Source does appear to be extended
[Thu May 24 00:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 00:39:22 2012] Source is confused with source 16
[Thu May 24 00:39:38 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Thu May 24 00:39:38 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Thu May 24 00:39:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Thu May 24 00:39:38 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.69"
[Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src13.ximg exists
[Thu May 24 02:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src13.csv
[Thu May 24 02:04:24 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu May 24 02:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src13.csv
[Thu May 24 02:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 02:04:25 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu May 24 02:04:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu May 24 02:04:25 2012] fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May 24 02:04:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu May 24 02:04:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 03:03:03 2012] Source 17 is offset by -2.985272 and -3.634335 pixels which is larger than
2 X fitted extent = 7.301701 x 2.163246, not incorporating fit results
[Thu May 24 03:03:03 2012] Warning, spatial fit 13 centroid is now closest to src. 16
[Thu May 24 03:03:03 2012] Vigneting correction estimate = 1.000000
[Thu May 24 03:03:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 03:03:03 2012] Assessing source extent using major
[Thu May 24 03:03:03 2012] Source does appear to be extended
[Thu May 24 03:03:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 03:03:14 2012] XMMSAS src. selection expression = ellipse(26315.845337, 28910.602814, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 03:03:14 2012] Writing source region out to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src17_src.reg
[Thu May 24 03:03:14 2012] Extracting stamp from image fullrun_pn_xmm0601270201_pi300-10000_cl_sm2.00.img.gz, (266, 295) - (341, 370)
[Thu May 24 03:03:15 2012] XMMSAS bgd. selection expression = annulus(26315.845337, 28910.602814, 1087.500000, 2175.000000, X, Y) && !ellipse(27081.318440, 27684.136400, 1525.538444, 1525.538444, 0.000000, X, Y) && !ellipse(27880.687744, 28966.185852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.672516, 28911.752441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27111.620640, 25621.878000, 1119.744032, 1119.744032, 0.000000, X, Y)
[Thu May 24 03:03:15 2012] Writing fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src17.gif
[Thu May 24 03:15:25 2012] Mean detx,y = (-485.40, -1463.15) 
[Thu May 24 03:15:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 03:16:00 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 03:16:01 2012] Setting source spectrum file to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 24 03:16:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu May 24 04:27:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 24 04:27:31 2012] rmf not generated due to insufficient counts
[Thu May 24 05:46:58 2012] Updating aperture counts using extracted products
[Thu May 24 05:46:58 2012] Error reading totcts from fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 24 05:46:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 05:46:59 2012] Using photon index=1.80, rate=0.00673, arf fullrun_pn_xmm0601270201_pi300-10000_pass1_cl_src17.arf
[Thu May 24 05:46:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 05:46:59 2012] Updating source flux to 2.1e-14
[Thu May 24 05:48:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting