[Wed May 23 20:55:25 2012] Detection parameters:
  Position = (389.4, 364.7) = 17 19 6.15 -40 57 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.6 +/- 8.8
  Background counts = 16.1
  Rate = 0.002 +/- 0.0005

[Wed May 23 20:55:26 2012] Off-axis axis estimate = 8.16'
[Wed May 23 23:40:28 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed May 23 23:40:28 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed May 23 23:40:28 2012] source mask rpix=2.4, npix_max = 34, mask sum = 18, frac = 0.529
[Wed May 23 23:40:28 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.51"
[Thu May 24 00:39:11 2012] fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 24 00:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_src15.csv
[Thu May 24 00:39:11 2012] fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 24 00:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_src15.csv
[Thu May 24 00:39:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 00:39:12 2012] fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 24 00:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 24 00:39:12 2012] fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 24 00:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 24 00:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 00:39:30 2012] Spatial fit model total counts = 209.747000, observed total counts = 179.000000
[Thu May 24 00:39:30 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 00:39:30 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:30 2012] Assessing source extent using major
[Thu May 24 00:39:30 2012] Source does appear to be extended
[Thu May 24 00:39:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 00:39:30 2012] Deleting source due to low Poisson probability 1.0