[Wed May 23 20:54:48 2012] Detection parameters:
  Position = (321.4, 335.0) = 17 19 32.25 -40 59 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.6 +/- 16.1
  Background counts = 20.7
  Rate = 0.002 +/- 0.0005

[Wed May 23 20:54:49 2012] Off-axis axis estimate = 3.13'
[Wed May 23 23:05:08 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed May 23 23:05:08 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed May 23 23:05:08 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.686
[Wed May 23 23:05:08 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.99"
[Wed May 23 23:40:27 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 23 23:40:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src10.csv
[Wed May 23 23:40:27 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 23 23:40:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src10.csv
[Wed May 23 23:40:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 23 23:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 00:39:26 2012] Source 8 is offset by 2.314087 and -8.368930 pixels which is larger than
2 X fitted extent = 6.953887 x 6.953887, not incorporating fit results
[Thu May 24 00:39:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:26 2012] Assessing source extent using major
[Thu May 24 00:39:26 2012] Source does appear to be extended
[Thu May 24 00:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 00:39:26 2012] Deleting source due to low Poisson probability 0.9