[Wed May 23 20:54:48 2012] Detection parameters:
  Position = (190.6, 460.4) = 17 20 22.40 -40 50 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.9 +/- 8.9
  Background counts = 12.2
  Rate = 0.001 +/- 0.0003

[Wed May 23 20:54:49 2012] Off-axis axis estimate = 14.10'
[Wed May 23 23:05:08 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Wed May 23 23:05:08 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Wed May 23 23:05:08 2012] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.907
[Wed May 23 23:05:08 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.48"
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src20.csv
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src20.csv
[Wed May 23 23:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 23 23:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 00:39:26 2012] Spatial fit model total counts = 192.008000, observed total counts = 119.000000
[Thu May 24 00:39:26 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 00:39:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:26 2012] Assessing source extent using major
[Thu May 24 00:39:26 2012] Source does appear to be extended
[Thu May 24 00:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 00:39:26 2012] Deleting source due to low Poisson probability 0.8