[Wed May 23 20:54:48 2012] Detection parameters:
  Position = (405.8, 330.1) = 17 18 59.84 -41 0 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.3 +/- 14.7
  Background counts = 16.9
  Rate = 0.006 +/- 0.0006

[Wed May 23 20:54:49 2012] Off-axis axis estimate = 8.11'
[Wed May 23 23:05:08 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed May 23 23:05:08 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed May 23 23:05:08 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.885
[Wed May 23 23:05:08 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.48"
[Wed May 23 23:40:27 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 23 23:40:27 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 23 23:40:27 2012] Fit fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 23 23:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 23 23:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 00:39:26 2012] Spatial fit model total counts = 279.894000, observed total counts = 254.000000
[Thu May 24 00:39:26 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 00:39:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:26 2012] Assessing source extent using major
[Thu May 24 00:39:26 2012] Source does appear to be extended
[Thu May 24 00:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 02:04:25 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Thu May 24 02:04:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 02:04:25 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Thu May 24 02:04:25 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.885
[Thu May 24 02:04:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.48"
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 24 02:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src3.csv
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 24 02:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src3.csv
[Thu May 24 02:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 24 02:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 24 02:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 24 02:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 03:03:04 2012] Spatial fit model total counts = 291.296000, observed total counts = 254.000000
[Thu May 24 03:03:04 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 03:03:04 2012] Vigneting correction estimate = 1.000000
[Thu May 24 03:03:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 03:03:04 2012] Assessing source extent using major
[Thu May 24 03:03:04 2012] Source does appear to be extended
[Thu May 24 03:03:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 05:10:54 2012] XMMSAS src. selection expression = ellipse(35253.085480, 28668.238464, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 05:10:54 2012] Writing source region out to fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src10_src.reg
[Thu May 24 05:10:54 2012] Extracting stamp from image fullrun_mos1_xmm0601270201_pi300-10000_cl_sm2.00.img.gz, (368, 293) - (443, 368)
[Thu May 24 05:10:54 2012] XMMSAS bgd. selection expression = annulus(35253.085480, 28668.238464, 1087.500000, 2175.000000, X, Y)
[Thu May 24 05:10:54 2012] Writing fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src10.gif
[Thu May 24 05:16:13 2012] Mean detx,y = (1196.76, 7996.30) 
[Thu May 24 05:16:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 05:17:09 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 05:17:09 2012] Setting source spectrum file to fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 24 05:17:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 24 05:28:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 24 05:28:58 2012] rmf not generated due to insufficient counts
[Thu May 24 05:46:59 2012] Updating aperture counts using extracted products
[Thu May 24 05:46:59 2012] Error reading totcts from fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 24 05:46:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 05:46:59 2012] Using photon index=1.80, rate=0.00563, arf fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src10.arf
[Thu May 24 05:46:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 05:46:59 2012] Updating source flux to 7.3e-14
[Thu May 24 05:47:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting