[Wed May 23 20:54:48 2012] Detection parameters:
  Position = (312.0, 318.8) = 17 19 35.87 -41 0 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65835.8 +/- 303.7
  Background counts = 23.7
  Rate = 2 +/- 0.009

[Wed May 23 20:54:49 2012] Off-axis axis estimate = 1.77'
[Wed May 23 23:05:08 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed May 23 23:05:08 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed May 23 23:05:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed May 23 23:05:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Wed May 23 23:40:27 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 23 23:40:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src1.csv
[Wed May 23 23:40:27 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 23 23:40:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src1.csv
[Wed May 23 23:40:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 23 23:40:28 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 23 23:40:28 2012] Fit fullrun_mos1_xmm0601270201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 00:39:26 2012] Spatial fit model total counts = 60370.000000, observed total counts = 60370.000000
[Thu May 24 00:39:26 2012] Offset between fit and detection position for source 1 = 0.256080 pixels
[Thu May 24 00:39:26 2012] 60247.200000 total counts/ 12863.100000 bgd. counts: snr = 417.791705
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.256080 pixels
  Position = (311.8, 318.6) = 17 19 35.94 -41 0 53.2
  Extent = 6.3 (6.2-6.3)", rotation angle = 0
  Source counts = 47384.1 +/- 245.5
  Background counts = 12863.1
  Rate = 1 +/- 0.007
[Thu May 24 00:39:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 00:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 00:39:26 2012] Assessing source extent using major axis lower bound
[Thu May 24 00:39:26 2012] Source does appear to be extended
[Thu May 24 00:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 02:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 02:04:25 2012] Initial guess for spatial extent in simple fitting = 6.26"
[Thu May 24 02:04:25 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.063
[Thu May 24 02:04:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.26"
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 02:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src1.csv
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 02:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src1.csv
[Thu May 24 02:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 02:11:22 2012] fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 02:11:22 2012] Fit fullrun_mos1_xmm0601270201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 03:03:04 2012] Spatial fit model total counts = 60489.000000, observed total counts = 60476.000000
[Thu May 24 03:03:04 2012] Offset between fit and detection position for source 1 = 0.017051 pixels
[Thu May 24 03:03:04 2012] 60557.200000 total counts/ 13028.300000 bgd. counts: snr = 416.403037
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017051 pixels
  Position = (311.8, 318.6) = 17 19 35.94 -41 0 53.3
  Extent = 6.3 (6.2-6.3)", rotation angle = 0
  Source counts = 47528.9 +/- 246.1
  Background counts = 13028.3
  Rate = 1 +/- 0.007
[Thu May 24 03:03:04 2012] Vigneting correction estimate = 1.000000
[Thu May 24 03:03:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 03:03:04 2012] Assessing source extent using major axis lower bound
[Thu May 24 03:03:04 2012] Source does appear to be extended
[Thu May 24 03:03:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 05:10:54 2012] Counts = 47528.900000, rescaling region sizes by 3.000000
[Thu May 24 05:10:54 2012] XMMSAS src. selection expression = ellipse(27078.803520, 27668.990200, 1130.529633, 1130.529633, 0.000000, X, Y)
[Thu May 24 05:10:54 2012] Writing source region out to fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1_src.reg
[Thu May 24 05:10:54 2012] Extracting stamp from image fullrun_mos1_xmm0601270201_pi300-10000_cl_sm2.00.img.gz, (247, 254) - (377, 384)
[Thu May 24 05:10:54 2012] XMMSAS bgd. selection expression = annulus(27078.803520, 27668.990200, 5652.648163, 11305.296325, X, Y) && !ellipse(35253.085480, 28668.238464, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 05:10:54 2012] Writing fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1.gif
[Thu May 24 05:11:01 2012] Mean detx,y = (327.07, -175.54) 
[Thu May 24 05:11:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 05:15:43 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 05:15:44 2012] Setting source spectrum file to fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 05:15:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 24 05:46:59 2012] Updating aperture counts using extracted products
[Thu May 24 05:46:59 2012] Error reading totcts from fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 05:46:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 05:46:59 2012] Using photon index=1.80, rate=1.41, arf fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1.arf
[Thu May 24 05:46:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 05:46:59 2012] Updating source flux to 1.2e-11
[Thu May 24 05:47:22 2012] Reading fit data from xmm0601270201/analysis//spectral/fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 24 05:47:22 2012] Spectral fit parameter nH value = 4.00095e+20
[Thu May 24 05:47:22 2012] Spectral fit parameter PhoIndex value = 1.01239
[Thu May 24 05:47:22 2012] Failed to get F(0.3-8.0) from xmm0601270201/analysis//spectral/fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 24 05:47:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 05:47:22 2012] Using Nh = 4e+20, photon index=1.01, rate=1.41, arf fullrun_mos1_xmm0601270201_pi300-10000_pass1_cl_src1.arf
[Thu May 24 05:47:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 05:47:22 2012] Updating source flux to 2e-11