[Sun May 20 03:14:55 2012] Detection parameters:
  Position = (485.4, 238.6) = 21 22 26.18 42 15 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.7 +/- 26.0
  Background counts = 182.9
  Rate = 0.005 +/- 0.001

[Sun May 20 03:14:56 2012] Off-axis axis estimate = 14.24'
[Sun May 20 03:18:19 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Sun May 20 03:18:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 03:18:19 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Sun May 20 03:18:19 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Sun May 20 03:18:19 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.55"
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src6.ximg exists
[Sun May 20 04:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src6.csv
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May 20 04:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src6.csv
[Sun May 20 04:45:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May 20 04:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May 20 04:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May 20 04:45:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 05:26:12 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.592205 pixels away
[Sun May 20 05:26:12 2012] Vigneting correction estimate = 1.000000
[Sun May 20 05:26:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 05:26:12 2012] Assessing source extent using major
[Sun May 20 05:26:12 2012] Source does appear to be extended
[Sun May 20 05:26:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 05:26:12 2012] Source is confused with source 7
[Sun May 20 05:26:21 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Sun May 20 05:26:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 20 05:26:21 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Sun May 20 05:26:21 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Sun May 20 05:26:21 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.55"
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src6.ximg exists
[Sun May 20 06:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src6.csv
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May 20 06:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src6.csv
[Sun May 20 06:43:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May 20 06:43:55 2012] Fit fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun May 20 07:00:31 2012] Source 6 is offset by 3.481984 and -8.371085 pixels which is larger than
2 X fitted extent = 2.024230 x 2.024230, not incorporating fit results
[Sun May 20 07:00:31 2012] Spatial fit model total counts = 1892.220000, observed total counts = 1164.000000
[Sun May 20 07:00:31 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 07:00:31 2012] Vigneting correction estimate = 1.000000
[Sun May 20 07:00:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 07:00:31 2012] Assessing source extent using major
[Sun May 20 07:00:31 2012] Source does appear to be extended
[Sun May 20 07:00:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 07:00:39 2012] XMMSAS src. selection expression = ellipse(42185.592651, 20709.603622, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 07:00:39 2012] Writing source region out to fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src6_src.reg
[Sun May 20 07:00:39 2012] Extracting stamp from image fullrun_pn_xmm0601270101_pi300-10000_cl_sm2.00.img.gz, (448, 201) - (523, 276)
[Sun May 20 07:00:39 2012] XMMSAS bgd. selection expression = annulus(42185.592651, 20709.603622, 1087.500000, 2175.000000, X, Y) && !ellipse(42598.162964, 20223.980179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42319.392853, 19355.573196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41071.936200, 20062.968000, 2138.440062, 2138.440062, 0.000000, X, Y) && !ellipse(42429.546000, 17977.156000, 2209.296064, 2209.296064, 0.000000, X, Y) && !ellipse(41625.416000, 16343.316000, 2245.832065, 2245.832065, 0.000000, X, Y)
[Sun May 20 07:00:39 2012] Writing fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src6.gif
[Sun May 20 07:06:53 2012] Mean detx,y = (-17558.39, -2914.50) 
[Sun May 20 07:06:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 07:07:20 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 07:07:20 2012] Setting source spectrum file to fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May 20 07:07:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun May 20 07:18:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 07:18:36 2012] rmf not generated due to insufficient counts
[Sun May 20 07:50:13 2012] Updating aperture counts using extracted products
[Sun May 20 07:50:13 2012] Error reading totcts from fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May 20 07:50:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 07:50:13 2012] Using photon index=1.80, rate=0.00522, arf fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src6.arf
[Sun May 20 07:50:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 07:50:13 2012] Updating source flux to 4.5e-14
[Sun May 20 07:50:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting