[Sun May 20 03:14:55 2012] Detection parameters:
  Position = (484.0, 200.3) = 21 22 26.82 42 12 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.7 +/- 24.6
  Background counts = 171.8
  Rate = 0.005 +/- 0.0009

[Sun May 20 03:14:56 2012] Off-axis axis estimate = 15.22'
[Sun May 20 03:18:19 2012] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Sun May 20 03:18:19 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Sun May 20 03:18:19 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.008
[Sun May 20 03:18:19 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 14.04"
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 20 04:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src11.csv
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 20 04:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src11.csv
[Sun May 20 04:45:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 20 04:45:40 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 20 04:45:40 2012] Fit fullrun_pn_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 20 05:26:12 2012] Warning, spatial fit 11 centroid is now closest to src. 12
[Sun May 20 05:26:12 2012] Source 11 is offset by 5.036059 and 3.868522 pixels which is larger than
2 X fitted extent = 1.618777 x 1.618777, not incorporating fit results
[Sun May 20 05:26:12 2012] Vigneting correction estimate = 1.000000
[Sun May 20 05:26:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 05:26:12 2012] Assessing source extent using major
[Sun May 20 05:26:12 2012] Source does appear to be extended
[Sun May 20 05:26:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 05:26:12 2012] Source is confused with source 12
[Sun May 20 05:26:21 2012] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Sun May 20 05:26:21 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Sun May 20 05:26:21 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.008
[Sun May 20 05:26:21 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 14.04"
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 20 06:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src11.csv
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 20 06:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src11.csv
[Sun May 20 06:43:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 20 06:43:55 2012] fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 20 06:43:56 2012] Fit fullrun_pn_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May 20 07:00:31 2012] Warning, spatial fit 11 centroid is now closest to src. 10
[Sun May 20 07:00:31 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 29.887220 pixels away
[Sun May 20 07:00:31 2012] Vigneting correction estimate = 1.000000
[Sun May 20 07:00:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 07:00:31 2012] Assessing source extent using major
[Sun May 20 07:00:31 2012] Source does appear to be extended
[Sun May 20 07:00:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 07:00:39 2012] XMMSAS src. selection expression = ellipse(42055.262573, 17377.687881, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 07:00:39 2012] Writing source region out to fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src11_src.reg
[Sun May 20 07:00:39 2012] Extracting stamp from image fullrun_pn_xmm0601270101_pi300-10000_cl_sm2.00.img.gz, (446, 163) - (521, 238)
[Sun May 20 07:00:39 2012] XMMSAS bgd. selection expression = annulus(42055.262573, 17377.687881, 1087.500000, 2175.000000, X, Y) && !ellipse(42598.162964, 20223.980179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42319.392853, 19355.573196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41071.936200, 20062.968000, 2138.440062, 2138.440062, 0.000000, X, Y) && !ellipse(42429.546000, 17977.156000, 2209.296064, 2209.296064, 0.000000, X, Y) && !ellipse(41625.416000, 16343.316000, 2245.832065, 2245.832065, 0.000000, X, Y)
[Sun May 20 07:00:39 2012] Writing fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src11.gif
[Sun May 20 07:10:42 2012] Mean detx,y = (-17554.21, -6238.21) 
[Sun May 20 07:10:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 07:10:57 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 07:10:58 2012] Setting source spectrum file to fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 20 07:10:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 20 07:25:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 07:25:05 2012] rmf not generated due to insufficient counts
[Sun May 20 07:50:13 2012] Updating aperture counts using extracted products
[Sun May 20 07:50:13 2012] Error reading totcts from fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 20 07:50:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 07:50:13 2012] Using photon index=1.80, rate=0.00457, arf fullrun_pn_xmm0601270101_pi300-10000_pass1_cl_src11.arf
[Sun May 20 07:50:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 07:50:13 2012] Updating source flux to 4e-14
[Sun May 20 07:50:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting