[Sun May 20 03:15:12 2012] Detection parameters:
  Position = (285.2, 278.9) = 21 23 44.62 42 18 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10709.1 +/- 123.4
  Background counts = 31.1
  Rate = 0.4 +/- 0.005

[Sun May 20 03:15:13 2012] Off-axis axis estimate = 1.71'
[Sun May 20 04:45:40 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun May 20 04:45:40 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun May 20 04:45:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun May 20 04:45:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun May 20 05:08:31 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 20 05:08:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 05:08:31 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 20 05:08:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 05:08:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 05:08:31 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 20 05:08:31 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 20 05:08:31 2012] Fit fullrun_mos1_xmm0601270101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 20 05:26:14 2012] Spatial fit model total counts = 9605.180000, observed total counts = 9606.000000
[Sun May 20 05:26:14 2012] Offset between fit and detection position for source 1 = 0.106074 pixels
[Sun May 20 05:26:14 2012] 9612.670000 total counts/ 2278.720000 bgd. counts: snr = 153.635813
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.106074 pixels
  Position = (285.3, 278.8) = 21 23 44.61 42 18 0.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7333.9 +/- 98.0
  Background counts = 2278.7
  Rate = 0.3 +/- 0.004
[Sun May 20 05:26:14 2012] Vigneting correction estimate = 1.000000
[Sun May 20 05:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 05:26:14 2012] Assessing source extent using major axis lower bound
[Sun May 20 05:26:14 2012] Source does appear to be extended
[Sun May 20 05:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 06:43:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 06:43:56 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Sun May 20 06:43:56 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.989
[Sun May 20 06:43:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Sun May 20 06:49:35 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 20 06:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 06:49:35 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 20 06:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 06:49:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 06:49:35 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 20 06:49:35 2012] fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 20 06:49:35 2012] Fit fullrun_mos1_xmm0601270101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 20 07:00:32 2012] Spatial fit model total counts = 9631.850000, observed total counts = 9624.000000
[Sun May 20 07:00:32 2012] Offset between fit and detection position for source 1 = 0.012380 pixels
[Sun May 20 07:00:32 2012] 9677.840000 total counts/ 2332.850000 bgd. counts: snr = 152.071490
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012380 pixels
  Position = (285.3, 278.7) = 21 23 44.61 42 18 0.1
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7345.0 +/- 98.4
  Background counts = 2332.8
  Rate = 0.3 +/- 0.004
[Sun May 20 07:00:32 2012] Vigneting correction estimate = 1.000000
[Sun May 20 07:00:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 07:00:32 2012] Assessing source extent using major axis lower bound
[Sun May 20 07:00:32 2012] Source does appear to be extended
[Sun May 20 07:00:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 07:30:42 2012] Counts = 7344.990000, rescaling region sizes by 2.000000
[Sun May 20 07:30:42 2012] XMMSAS src. selection expression = ellipse(24771.105400, 24202.475400, 648.284419, 648.284419, 0.000000, X, Y)
[Sun May 20 07:30:42 2012] Writing source region out to fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1_src.reg
[Sun May 20 07:30:42 2012] Extracting stamp from image fullrun_mos1_xmm0601270101_pi300-10000_cl_sm2.00.img.gz, (248, 241) - (323, 316)
[Sun May 20 07:30:42 2012] XMMSAS bgd. selection expression = annulus(24771.105400, 24202.475400, 2160.948062, 4321.896124, X, Y)
[Sun May 20 07:30:42 2012] Writing fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1.gif
[Sun May 20 07:30:45 2012] Mean detx,y = (365.12, -314.89) 
[Sun May 20 07:30:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 07:30:59 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 07:30:59 2012] Setting source spectrum file to fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 20 07:30:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 20 07:50:13 2012] Updating aperture counts using extracted products
[Sun May 20 07:50:13 2012] Error reading totcts from fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 20 07:50:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 07:50:13 2012] Using photon index=1.80, rate=0.263, arf fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1.arf
[Sun May 20 07:50:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 07:50:13 2012] Updating source flux to 2.6e-12
[Sun May 20 07:50:36 2012] Reading fit data from xmm0601270101/analysis//spectral/fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1_pl.csv
[Sun May 20 07:50:36 2012] Spectral fit parameter nH value = 4.02426e+20
[Sun May 20 07:50:36 2012] Spectral fit parameter PhoIndex value = 0.557718
[Sun May 20 07:50:36 2012] Failed to get F(0.3-8.0) from xmm0601270101/analysis//spectral/fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun May 20 07:50:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 07:50:36 2012] Using Nh = 4e+20, photon index=0.56, rate=0.263, arf fullrun_mos1_xmm0601270101_pi300-10000_pass1_cl_src1.arf
[Sun May 20 07:50:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 07:50:36 2012] Updating source flux to 5.2e-12