[Thu Apr  5 18:01:35 2012] Detection parameters:
  Position = (164.6, 353.3) = 15 49 40.47 -32 11 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.4 +/- 17.8
  Background counts = 98.8
  Rate = 0.003 +/- 0.0006

[Thu Apr  5 18:01:36 2012] Off-axis axis estimate = 10.48'
[Thu Apr  5 18:03:27 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 18:03:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 18:03:27 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Thu Apr  5 18:03:27 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Thu Apr  5 18:03:27 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.67"
[Thu Apr  5 18:33:02 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass0_src7.ximg exists
[Thu Apr  5 18:33:02 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Apr  5 18:33:02 2012] Fit fullrun_pn_xmm0601260301_pi300-10000_cl_pass0_src7 appears to have run properly
[Thu Apr  5 18:33:02 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Apr  5 18:33:02 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Apr  5 18:33:02 2012] Fit fullrun_pn_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Apr  5 18:57:23 2012] Spatial fit model total counts = 378.639000, observed total counts = 378.000000
[Thu Apr  5 18:57:23 2012] Offset between fit and detection position for source 7 = 6.596960 pixels
[Thu Apr  5 18:57:23 2012] 370.466000 total counts/ 219.890000 bgd. counts: snr = 10.154371
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 6.596960 pixels
  Position = (171.2, 352.7) = 15 49 38.22 -32 11 27.4
  Extent = 23.3 (23.3-23.3)", rotation angle = 0
  Source counts = 150.6 +/- 19.2
  Background counts = 219.9
  Rate = 0.01 +/- 0.001
[Thu Apr  5 18:57:23 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 18:57:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 18:57:23 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 18:57:23 2012] Source does appear to be extended
[Thu Apr  5 18:57:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 18:57:23 2012] Source is confused with source 9
[Thu Apr  5 18:57:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 18:57:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 18:57:29 2012] Initial guess for spatial extent in simple fitting = 23.34"
[Thu Apr  5 18:57:29 2012] source mask rpix=5.4, npix_max = 137, mask sum = 126, frac = 0.916
[Thu Apr  5 18:57:29 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 23.34"
[Thu Apr  5 19:17:30 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_src6.ximg exists
[Thu Apr  5 19:17:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_src6.csv
[Thu Apr  5 19:17:30 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Apr  5 19:17:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_src6.csv
[Thu Apr  5 19:17:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:17:30 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Apr  5 19:17:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Apr  5 19:17:30 2012] fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Apr  5 19:17:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Apr  5 19:17:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:36:53 2012] Warning, spatial fit 6 centroid is now closest to src. 9
[Thu Apr  5 19:36:53 2012] Source 7 is offset by -3.361195 and 5.242101 pixels which is larger than
2 X fitted extent = 1.333485 x 1.333485, not incorporating fit results
[Thu Apr  5 19:36:53 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 19:36:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 19:36:53 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 19:36:53 2012] Source does appear to be extended
[Thu Apr  5 19:36:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:36:59 2012] XMMSAS src. selection expression = ellipse(14846.690000, 30640.358800, 1400.358040, 1400.358040, 0.000000, X, Y)
[Thu Apr  5 19:36:59 2012] Writing source region out to fullrun_pn_xmm0601260301_pi300-10000_pass1_cl_src7_src.reg
[Thu Apr  5 19:36:59 2012] Extracting stamp from image fullrun_pn_xmm0601260301_pi300-10000_cl_sm2.00.img.gz, (91, 272) - (252, 433)
[Thu Apr  5 19:36:59 2012] XMMSAS bgd. selection expression = annulus(14846.690000, 30640.358800, 2333.930067, 4667.860134, X, Y) && !ellipse(14271.890366, 29461.638214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11977.132614, 26721.863037, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Apr  5 19:36:59 2012] Writing fullrun_pn_xmm0601260301_pi300-10000_pass1_cl_src7.gif
[Thu Apr  5 19:42:39 2012] Mean detx,y = (9235.32, 7864.24) 
[Thu Apr  5 19:42:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 19:43:26 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 19:43:27 2012] Setting source spectrum file to fullrun_pn_xmm0601260301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Apr  5 19:43:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601260301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Apr  5 20:07:58 2012] Updating aperture counts using extracted products
[Thu Apr  5 20:07:58 2012] Error reading totcts from fullrun_pn_xmm0601260301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Apr  5 20:07:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:07:59 2012] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0601260301_pi300-10000_pass1_cl_src7.arf
[Thu Apr  5 20:07:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:07:59 2012] Updating source flux to 4.5e-14
[Thu Apr  5 20:08:15 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Thu Apr  5 20:08:15 2012] Flag c found in src. 7 procflags, skipping spectral fitting