[Thu Apr  5 18:01:58 2012] Detection parameters:
  Position = (332.1, 411.8) = 15 48 43.10 -32 7 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20027.0 +/- 167.6
  Background counts = 38.4
  Rate = 0.6 +/- 0.005

[Thu Apr  5 18:01:58 2012] Off-axis axis estimate = 8.57'
[Thu Apr  5 18:37:57 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 18:37:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 18:37:57 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Thu Apr  5 18:37:57 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Thu Apr  5 18:37:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.72"
[Thu Apr  5 18:57:20 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Apr  5 18:57:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 18:57:20 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Apr  5 18:57:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 18:57:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 18:57:20 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Apr  5 18:57:20 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Apr  5 18:57:20 2012] Fit fullrun_mos2_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Apr  5 18:57:25 2012] Spatial fit model total counts = 17671.500000, observed total counts = 17723.000000
[Thu Apr  5 18:57:25 2012] Offset between fit and detection position for source 3 = 0.285260 pixels
[Thu Apr  5 18:57:25 2012] 17681.840000 total counts/ 3314.840000 bgd. counts: snr = 249.536918
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.285260 pixels
  Position = (331.8, 411.6) = 15 48 43.18 -32 7 11.6
  Extent = 7.2 (7.2-7.2)", rotation angle = 0
  Source counts = 14367.0 +/- 133.0
  Background counts = 3314.8
  Rate = 0.5 +/- 0.005
[Thu Apr  5 18:57:25 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 18:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 18:57:25 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 18:57:25 2012] Source does appear to be extended
[Thu Apr  5 18:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:22:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 19:22:45 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Apr  5 19:22:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.075
[Thu Apr  5 19:22:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.21"
[Thu Apr  5 19:36:51 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Apr  5 19:36:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 19:36:51 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Apr  5 19:36:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 19:36:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:36:51 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Apr  5 19:36:51 2012] fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Apr  5 19:36:51 2012] Fit fullrun_mos2_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Apr  5 19:36:55 2012] Spatial fit model total counts = 16897.600000, observed total counts = 16965.000000
[Thu Apr  5 19:36:55 2012] Offset between fit and detection position for source 3 = 0.028388 pixels
[Thu Apr  5 19:36:55 2012] 16831.770000 total counts/ 2926.170000 bgd. counts: snr = 257.063227
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.028388 pixels
  Position = (331.8, 411.7) = 15 48 43.18 -32 7 11.5
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 13905.6 +/- 129.7
  Background counts = 2926.2
  Rate = 0.5 +/- 0.005
[Thu Apr  5 19:36:55 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 19:36:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 19:36:55 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 19:36:55 2012] Source does appear to be extended
[Thu Apr  5 19:36:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:57:49 2012] Counts = 13905.600000, rescaling region sizes by 3.000000
[Thu Apr  5 19:57:49 2012] XMMSAS src. selection expression = ellipse(28822.278080, 35766.771400, 1255.395636, 1255.395636, 0.000000, X, Y)
[Thu Apr  5 19:57:49 2012] Writing source region out to fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3_src.reg
[Thu Apr  5 19:57:49 2012] Extracting stamp from image fullrun_mos2_xmm0601260301_pi300-10000_cl_sm2.00.img.gz, (260, 340) - (404, 484)
[Thu Apr  5 19:57:49 2012] XMMSAS bgd. selection expression = annulus(28822.278080, 35766.771400, 6276.978181, 12553.956361, X, Y) && !ellipse(27110.171692, 23184.017914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31104.302185, 29793.415985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25064.230011, 24048.606964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.566803, 36829.158661, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Apr  5 19:57:49 2012] Writing fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3.gif
[Thu Apr  5 19:57:53 2012] Mean detx,y = (5575.28, -10909.11) 
[Thu Apr  5 19:57:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 20:00:01 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 20:00:01 2012] Setting source spectrum file to fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Apr  5 20:00:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Apr  5 20:07:59 2012] Updating aperture counts using extracted products
[Thu Apr  5 20:07:59 2012] Error reading totcts from fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Apr  5 20:07:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:07:59 2012] Using photon index=1.80, rate=0.493, arf fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3.arf
[Thu Apr  5 20:07:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:07:59 2012] Updating source flux to 8.8e-12
[Thu Apr  5 20:08:15 2012] Reading fit data from xmm0601260301/analysis//spectral/fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3_pl.csv
[Thu Apr  5 20:08:15 2012] Spectral fit parameter nH value = 7.99046e+20
[Thu Apr  5 20:08:15 2012] Spectral fit parameter PhoIndex value = 2.23503
[Thu Apr  5 20:08:15 2012] Failed to get F(0.3-8.0) from xmm0601260301/analysis//spectral/fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Apr  5 20:08:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:08:15 2012] Using Nh = 8e+20, photon index=2.24, rate=0.493, arf fullrun_mos2_xmm0601260301_pi300-10000_pass1_cl_src3.arf
[Thu Apr  5 20:08:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:08:15 2012] Updating source flux to 7.8e-12