[Thu Apr  5 18:01:46 2012] Detection parameters:
  Position = (312.2, 266.8) = 15 48 49.91 -32 17 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2923.9 +/- 65.9
  Background counts = 58.2
  Rate = 0.1 +/- 0.002

[Thu Apr  5 18:01:46 2012] Off-axis axis estimate = 2.50'
[Thu Apr  5 18:33:02 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 18:33:02 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Apr  5 18:33:02 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Thu Apr  5 18:33:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.68"
[Thu Apr  5 18:37:57 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Apr  5 18:37:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 18:37:57 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Apr  5 18:37:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 18:37:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 18:37:57 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Apr  5 18:37:57 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Apr  5 18:37:57 2012] Fit fullrun_mos1_xmm0601260301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Apr  5 18:57:23 2012] Spatial fit model total counts = 2508.040000, observed total counts = 2513.000000
[Thu Apr  5 18:57:23 2012] Offset between fit and detection position for source 1 = 0.063794 pixels
[Thu Apr  5 18:57:23 2012] 2519.972000 total counts/ 788.922000 bgd. counts: snr = 61.630058
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.063794 pixels
  Position = (312.2, 266.8) = 15 48 49.91 -32 17 41.8
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1731.0 +/- 50.2
  Background counts = 788.9
  Rate = 0.06 +/- 0.002
[Thu Apr  5 18:57:23 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 18:57:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 18:57:23 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 18:57:23 2012] Source does appear to be extended
[Thu Apr  5 18:57:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:17:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 19:17:30 2012] Initial guess for spatial extent in simple fitting = 5.01"
[Thu Apr  5 19:17:30 2012] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.824
[Thu Apr  5 19:17:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.01"
[Thu Apr  5 19:22:45 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Apr  5 19:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 19:22:45 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Apr  5 19:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_src1.csv
[Thu Apr  5 19:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:22:45 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Apr  5 19:22:45 2012] fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Apr  5 19:22:45 2012] Fit fullrun_mos1_xmm0601260301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Apr  5 19:36:54 2012] Spatial fit model total counts = 2506.500000, observed total counts = 2505.000000
[Thu Apr  5 19:36:54 2012] Offset between fit and detection position for source 1 = 0.006730 pixels
[Thu Apr  5 19:36:54 2012] 2508.354000 total counts/ 773.984000 bgd. counts: snr = 62.341287
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006730 pixels
  Position = (312.2, 266.8) = 15 48 49.91 -32 17 41.8
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1734.4 +/- 50.1
  Background counts = 774.0
  Rate = 0.06 +/- 0.002
[Thu Apr  5 19:36:54 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 19:36:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 19:36:54 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 19:36:54 2012] Source does appear to be extended
[Thu Apr  5 19:36:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:52:28 2012] Counts = 1734.370000, rescaling region sizes by 2.000000
[Thu Apr  5 19:52:28 2012] XMMSAS src. selection expression = ellipse(27110.890760, 23161.044000, 603.105617, 603.105617, 0.000000, X, Y)
[Thu Apr  5 19:52:28 2012] Writing source region out to fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1_src.reg
[Thu Apr  5 19:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0601260301_pi300-10000_cl_sm2.00.img.gz, (278, 232) - (347, 301)
[Thu Apr  5 19:52:28 2012] XMMSAS bgd. selection expression = annulus(27110.890760, 23161.044000, 2010.352058, 4020.704116, X, Y) && !ellipse(27748.934600, 21045.286600, 374.707211, 374.707211, 0.000000, X, Y) && !ellipse(25088.139160, 24041.704400, 274.564851, 274.564851, 0.000000, X, Y)
[Thu Apr  5 19:52:28 2012] Writing fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1.gif
[Thu Apr  5 19:52:30 2012] Mean detx,y = (1495.25, -2107.90) 
[Thu Apr  5 19:52:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 19:52:38 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 19:52:38 2012] Setting source spectrum file to fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Apr  5 19:52:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Apr  5 20:07:59 2012] Updating aperture counts using extracted products
[Thu Apr  5 20:07:59 2012] Error reading totcts from fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Apr  5 20:07:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:07:59 2012] Using photon index=1.80, rate=0.0642, arf fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1.arf
[Thu Apr  5 20:07:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:07:59 2012] Updating source flux to 7e-13
[Thu Apr  5 20:08:06 2012] Reading fit data from xmm0601260301/analysis//spectral/fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Apr  5 20:08:06 2012] Spectral fit parameter nH value = 5.03963e+20
[Thu Apr  5 20:08:06 2012] Spectral fit parameter PhoIndex value = 2.72145
[Thu Apr  5 20:08:06 2012] Failed to get F(0.3-8.0) from xmm0601260301/analysis//spectral/fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Apr  5 20:08:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:08:06 2012] Using Nh = 5e+20, photon index=2.72, rate=0.0642, arf fullrun_mos1_xmm0601260301_pi300-10000_pass1_cl_src1.arf
[Thu Apr  5 20:08:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:08:06 2012] Updating source flux to 5.4e-13