[Fri Jan  6 10:58:09 2012] Detection parameters:
  Position = (362.5, 167.0) = 11 57 57.89 26 13 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1293.2 +/- 41.2
  Background counts = 108.8
  Rate = 0.03 +/- 0.001

[Fri Jan  6 10:58:10 2012] Off-axis axis estimate = 10.60'
[Fri Jan  6 11:04:11 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 11:04:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 11:04:11 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Fri Jan  6 11:04:11 2012] source mask rpix=2.7, npix_max = 40, mask sum = 29, frac = 0.710
[Fri Jan  6 11:04:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.73"
[Fri Jan  6 12:34:45 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jan  6 12:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 12:34:45 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jan  6 12:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 12:34:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 12:34:46 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jan  6 12:34:46 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jan  6 12:34:46 2012] Fit fullrun_pn_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jan  6 14:40:09 2012] Spatial fit model total counts = 1366.670000, observed total counts = 1367.000000
[Fri Jan  6 14:40:09 2012] Offset between fit and detection position for source 1 = 0.763919 pixels
[Fri Jan  6 14:40:09 2012] 1344.885000 total counts/ 554.915000 bgd. counts: snr = 33.534927
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.763919 pixels
  Position = (361.8, 167.3) = 11 57 58.11 26 13 22.7
  Extent = 4.8 (4.5-5.1)", rotation angle = 0
  Source counts = 790.0 +/- 36.7
  Background counts = 554.9
  Rate = 0.03 +/- 0.001
[Fri Jan  6 14:40:09 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 14:40:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 14:40:09 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 14:40:09 2012] Source does appear to be extended
[Fri Jan  6 14:40:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 14:40:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 14:40:40 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Fri Jan  6 14:40:40 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.877
[Fri Jan  6 14:40:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.79"
[Fri Jan  6 16:15:58 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jan  6 16:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_src1.csv
[Fri Jan  6 16:15:58 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jan  6 16:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_src1.csv
[Fri Jan  6 16:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 16:15:59 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan  6 16:15:59 2012] fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan  6 16:15:59 2012] Fit fullrun_pn_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan  6 18:17:01 2012] Spatial fit model total counts = 1088.290000, observed total counts = 1146.000000
[Fri Jan  6 18:17:01 2012] Offset between fit and detection position for source 1 = 0.080100 pixels
[Fri Jan  6 18:17:01 2012] 1034.066000 total counts/ 271.491000 bgd. counts: snr = 46.281225
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.080100 pixels
  Position = (361.9, 167.4) = 11 57 58.09 26 13 22.8
  Extent = 4.6 (4.5-4.6)", rotation angle = 0
  Source counts = 762.6 +/- 32.2
  Background counts = 271.5
  Rate = 0.03 +/- 0.001
[Fri Jan  6 18:17:01 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 18:17:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 18:17:01 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 18:17:01 2012] Source does appear to be extended
[Fri Jan  6 18:17:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 18:17:31 2012] XMMSAS src. selection expression = ellipse(31436.297700, 14511.342400, 274.735808, 274.735808, 0.000000, X, Y)
[Fri Jan  6 18:17:31 2012] Writing source region out to fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan  6 18:17:31 2012] Extracting stamp from image fullrun_pn_xmm0601260201_pi300-10000_cl_sm2.00.img.gz, (346, 152) - (378, 183)
[Fri Jan  6 18:17:32 2012] XMMSAS bgd. selection expression = annulus(31436.297700, 14511.342400, 457.893013, 915.786026, X, Y)
[Fri Jan  6 18:17:32 2012] Writing fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1.gif
[Fri Jan  6 18:17:40 2012] Mean detx,y = (-1923.05, -11164.34) 
[Fri Jan  6 18:17:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 18:18:07 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 18:18:07 2012] Setting source spectrum file to fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 18:18:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan  6 21:13:07 2012] Updating aperture counts using extracted products
[Fri Jan  6 21:13:07 2012] Error reading totcts from fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 21:13:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 21:13:08 2012] Using photon index=1.80, rate=0.03, arf fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 21:13:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 21:13:08 2012] Updating source flux to 3.2e-12
[Fri Jan  6 21:19:58 2012] Reading fit data from xmm0601260201/analysis//spectral/fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jan  6 21:19:58 2012] Spectral fit parameter nH value = 4.06234e+20
[Fri Jan  6 21:19:58 2012] Spectral fit parameter PhoIndex value = 2.24773
[Fri Jan  6 21:19:58 2012] Failed to get F(0.3-8.0) from xmm0601260201/analysis//spectral/fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 21:19:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 21:19:58 2012] Using Nh = 4.1e+20, photon index=2.25, rate=0.03, arf fullrun_pn_xmm0601260201_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 21:19:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 21:19:58 2012] Updating source flux to 2.7e-12