[Fri Jan  6 10:59:31 2012] Detection parameters:
  Position = (332.2, 414.9) = 11 58 7.65 26 31 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.0 +/- 18.9
  Background counts = 63.0
  Rate = 0.004 +/- 0.0004

[Fri Jan  6 10:59:32 2012] Off-axis axis estimate = 8.79'
[Fri Jan  6 13:14:15 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 13:14:15 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Fri Jan  6 13:14:15 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Fri Jan  6 13:14:15 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.82"
[Fri Jan  6 14:39:57 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jan  6 14:39:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_src19.csv
[Fri Jan  6 14:39:57 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jan  6 14:39:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_src19.csv
[Fri Jan  6 14:39:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 14:39:57 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jan  6 14:39:57 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jan  6 14:39:57 2012] Fit fullrun_mos2_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Jan  6 14:40:23 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.016872 pixels away
[Fri Jan  6 14:40:23 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 14:40:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 14:40:23 2012] Assessing source extent using major
[Fri Jan  6 14:40:23 2012] Source does appear to be extended
[Fri Jan  6 14:40:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 16:53:10 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 16:53:10 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Fri Jan  6 16:53:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Fri Jan  6 16:53:10 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.82"
[Fri Jan  6 18:16:48 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jan  6 18:16:48 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jan  6 18:16:48 2012] Fit fullrun_mos2_xmm0601260201_pi300-10000_cl_pass1_src18 appears to have run properly
[Fri Jan  6 18:16:49 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jan  6 18:16:49 2012] fullrun_mos2_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jan  6 18:16:49 2012] Fit fullrun_mos2_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Jan  6 18:17:14 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.016872 pixels away
[Fri Jan  6 18:17:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 18:17:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 18:17:14 2012] Assessing source extent using major
[Fri Jan  6 18:17:14 2012] Source does appear to be extended
[Fri Jan  6 18:17:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 20:14:08 2012] XMMSAS src. selection expression = ellipse(28853.397552, 36047.281738, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 20:14:08 2012] Writing source region out to fullrun_mos2_xmm0601260201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jan  6 20:14:08 2012] Extracting stamp from image fullrun_mos2_xmm0601260201_pi300-10000_cl_sm2.00.img.gz, (295, 377) - (370, 452)
[Fri Jan  6 20:14:08 2012] XMMSAS bgd. selection expression = annulus(28853.397552, 36047.281738, 1087.500000, 2175.000000, X, Y) && !ellipse(31473.722000, 39559.357400, 2006.248058, 1506.480043, 207.567999, X, Y)
[Fri Jan  6 20:14:08 2012] Writing fullrun_mos2_xmm0601260201_pi300-10000_pass1_cl_src6.gif
[Fri Jan  6 20:22:47 2012] Mean detx,y = (7578.44, -10028.49) 
[Fri Jan  6 20:22:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 20:23:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 20:23:07 2012] Setting source spectrum file to fullrun_mos2_xmm0601260201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jan  6 20:23:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601260201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jan  6 20:56:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 20:56:56 2012] rmf not generated due to insufficient counts
[Fri Jan  6 21:13:14 2012] Updating aperture counts using extracted products
[Fri Jan  6 21:13:14 2012] Error reading totcts from fullrun_mos2_xmm0601260201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jan  6 21:13:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 21:13:15 2012] Using photon index=1.80, rate=0.0036, arf fullrun_mos2_xmm0601260201_pi300-10000_pass1_cl_src6.arf
[Fri Jan  6 21:13:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 21:13:15 2012] Updating source flux to 7.8e-14
[Fri Jan  6 21:15:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting