[Fri Jan  6 10:58:49 2012] Detection parameters:
  Position = (362.3, 167.8) = 11 57 57.95 26 13 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 937.1 +/- 37.9
  Background counts = 74.3
  Rate = 0.02 +/- 0.0009

[Fri Jan  6 10:58:49 2012] Off-axis axis estimate = 10.54'
[Fri Jan  6 12:34:46 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 12:34:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 12:34:46 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Fri Jan  6 12:34:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Fri Jan  6 12:34:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.70"
[Fri Jan  6 13:14:14 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jan  6 13:14:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 13:14:14 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jan  6 13:14:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 13:14:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 13:14:14 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jan  6 13:14:14 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jan  6 13:14:14 2012] Fit fullrun_mos1_xmm0601260201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jan  6 14:40:14 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.869527 pixels away
[Fri Jan  6 14:40:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 14:40:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 14:40:14 2012] Assessing source extent using major
[Fri Jan  6 14:40:14 2012] Source does appear to be extended
[Fri Jan  6 14:40:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 16:15:59 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 16:15:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 16:15:59 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Fri Jan  6 16:15:59 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Fri Jan  6 16:15:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.70"
[Fri Jan  6 16:53:10 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jan  6 16:53:10 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jan  6 16:53:10 2012] Fit fullrun_mos1_xmm0601260201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jan  6 16:53:10 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan  6 16:53:10 2012] fullrun_mos1_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan  6 16:53:10 2012] Fit fullrun_mos1_xmm0601260201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan  6 18:17:06 2012] Spatial fit model total counts = 1180.000000, observed total counts = 1180.000000
[Fri Jan  6 18:17:06 2012] Offset between fit and detection position for source 1 = 0.171791 pixels
[Fri Jan  6 18:17:06 2012] 1176.249000 total counts/ 588.063000 bgd. counts: snr = 24.255082
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.171791 pixels
  Position = (362.2, 167.7) = 11 57 58.00 26 13 24.4
  Extent = 5.9 (5.5-6.3)", rotation angle = 0
  Source counts = 588.2 +/- 34.3
  Background counts = 588.1
  Rate = 0.02 +/- 0.0009
[Fri Jan  6 18:17:06 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 18:17:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 18:17:06 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 18:17:06 2012] Source does appear to be extended
[Fri Jan  6 18:17:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 19:35:39 2012] XMMSAS src. selection expression = ellipse(31460.768840, 14542.532400, 352.694410, 352.694410, 0.000000, X, Y)
[Fri Jan  6 19:35:39 2012] Writing source region out to fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan  6 19:35:39 2012] Extracting stamp from image fullrun_mos1_xmm0601260201_pi300-10000_cl_sm2.00.img.gz, (342, 147) - (382, 188)
[Fri Jan  6 19:35:39 2012] XMMSAS bgd. selection expression = annulus(31460.768840, 14542.532400, 587.824017, 1175.648034, X, Y)
[Fri Jan  6 19:35:39 2012] Writing fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1.gif
[Fri Jan  6 19:35:43 2012] Mean detx,y = (11208.67, -2317.85) 
[Fri Jan  6 19:35:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 19:36:00 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 19:36:00 2012] Setting source spectrum file to fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 19:36:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan  6 21:13:10 2012] Updating aperture counts using extracted products
[Fri Jan  6 21:13:10 2012] Error reading totcts from fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 21:13:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 21:13:12 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 21:13:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 21:13:12 2012] Updating source flux to 3.8e-13
[Fri Jan  6 21:15:07 2012] Reading fit data from xmm0601260201/analysis//spectral/fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jan  6 21:15:07 2012] Spectral fit parameter nH value = 4.94036e+19
[Fri Jan  6 21:15:07 2012] Spectral fit parameter PhoIndex value = 2.0153
[Fri Jan  6 21:15:07 2012] Failed to get F(0.3-8.0) from xmm0601260201/analysis//spectral/fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 21:15:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 21:15:07 2012] Using Nh = 4.9e+19, photon index=2.02, rate=0.0162, arf fullrun_mos1_xmm0601260201_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 21:15:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 21:15:07 2012] Updating source flux to 3.5e-13