[Sun Jun 24 10:27:52 2012] Detection parameters:
  Position = (194.7, 301.2) = 1 17 19.74 -47 22 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1425.6 +/- 46.6
  Background counts = 51.7
  Rate = 0.03 +/- 0.0009

[Sun Jun 24 10:27:55 2012] Off-axis axis estimate = 7.53'
[Sun Jun 24 10:32:17 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 10:32:17 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sun Jun 24 10:32:17 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.804
[Sun Jun 24 10:32:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.19"
[Sun Jun 24 12:07:32 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 24 12:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_src2.csv
[Sun Jun 24 12:07:32 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 24 12:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_src2.csv
[Sun Jun 24 12:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:07:32 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 24 12:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 24 12:07:33 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 24 12:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 24 12:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:35 2012] Spatial fit model total counts = 2360.190000, observed total counts = 1629.000000
[Sun Jun 24 14:30:35 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 14:30:36 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:36 2012] Assessing source extent using major
[Sun Jun 24 14:30:36 2012] Source does appear to be extended
[Sun Jun 24 14:30:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 14:31:13 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 14:31:13 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sun Jun 24 14:31:13 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.804
[Sun Jun 24 14:31:13 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.19"
[Sun Jun 24 15:52:56 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 24 15:52:56 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 24 15:52:56 2012] Fit fullrun_pn_xmm0601260101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Jun 24 15:52:57 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 24 15:52:57 2012] fullrun_pn_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 24 15:52:57 2012] Fit fullrun_pn_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jun 24 18:06:27 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.361815 pixels away
[Sun Jun 24 18:06:27 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:27 2012] Assessing source extent using major
[Sun Jun 24 18:06:27 2012] Source does appear to be extended
[Sun Jun 24 18:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 18:06:53 2012] Counts = 1425.626099, rescaling region sizes by 2.000000
[Sun Jun 24 18:06:53 2012] XMMSAS src. selection expression = ellipse(16888.589005, 26157.892334, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 24 18:06:53 2012] Writing source region out to fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 24 18:06:53 2012] Extracting stamp from image fullrun_pn_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (120, 226) - (270, 376)
[Sun Jun 24 18:06:53 2012] XMMSAS bgd. selection expression = annulus(16888.589005, 26157.892334, 4350.000000, 8700.000000, X, Y) && !ellipse(24142.937500, 34232.486908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10151.827850, 24898.155273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25086.039600, 23274.934000, 468.055213, 468.055213, 0.000000, X, Y) && !ellipse(18897.493027, 32671.595184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.942719, 25676.105408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22026.665800, 28681.755000, 284.778408, 284.778408, 0.000000, X, Y) && !ellipse(14766.051056, 27804.711426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20917.710590, 26770.779600, 497.089614, 497.089614, 0.000000, X, Y) && !ellipse(24545.631600, 24863.243600, 271.796808, 271.796808, 0.000000, X, Y) && !ellipse(19341.780319, 22806.531158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21710.841580, 20972.562600, 397.874411, 397.874411, 0.000000, X, Y)
[Sun Jun 24 18:06:53 2012] Writing fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2.gif
[Sun Jun 24 18:09:13 2012] Mean detx,y = (-7309.47, 7917.65) 
[Sun Jun 24 18:09:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 18:12:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 18:12:00 2012] Setting source spectrum file to fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 24 18:12:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 24 18:42:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 18:42:08 2012] rmf not generated due to insufficient counts
[Sun Jun 24 20:21:00 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:00 2012] Error reading totcts from fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 24 20:21:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:01 2012] Using photon index=1.80, rate=0.0269, arf fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 24 20:21:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:01 2012] Updating source flux to 1.4e-13
[Sun Jun 24 20:22:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 24 20:23:32 2012] xmm0601260101/analysis//spectral/fullrun_pn_xmm0601260101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete