[Sun Jun 24 10:28:57 2012] Detection parameters:
  Position = (315.5, 185.9) = 1 16 27.97 -47 31 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 10.6
  Background counts = 21.4
  Rate = 0.002 +/- 0.0003

[Sun Jun 24 10:28:57 2012] Off-axis axis estimate = 8.25'
[Sun Jun 24 13:36:09 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:36:09 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Sun Jun 24 13:36:09 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.847
[Sun Jun 24 13:36:09 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.55"
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src19.csv
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src19.csv
[Sun Jun 24 14:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 24 14:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:51 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 14.143803 pixels away
[Sun Jun 24 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:51 2012] Assessing source extent using major
[Sun Jun 24 14:30:51 2012] Source does appear to be extended
[Sun Jun 24 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:19:34 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:19:34 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Sun Jun 24 17:19:34 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.847
[Sun Jun 24 17:19:34 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.55"
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 24 18:06:16 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 24 18:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 24 18:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 24 18:06:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 18:06:40 2012] Spatial fit model total counts = 236.136000, observed total counts = 235.000000
[Sun Jun 24 18:06:40 2012] Offset between fit and detection position for source 37 = 0.619813 pixels
[Sun Jun 24 18:06:40 2012] 239.240700 total counts/ 203.499000 bgd. counts: snr = 2.505498
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.619813 pixels
  Position = (315.1, 186.4) = 1 16 28.14 -47 31 6.1
  Extent = 6.1" x 6.1", rotation angle = 0
  Source counts = 35.7 +/- 15.5
  Background counts = 203.5
  Rate = 0.0006 +/- 0.0003
[Sun Jun 24 18:06:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:40 2012] Assessing source extent using major
[Sun Jun 24 18:06:40 2012] Source does appear to be extended
[Sun Jun 24 18:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:48:35 2012] XMMSAS src. selection expression = ellipse(27368.961562, 16169.991200, 364.963811, 364.963811, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing source region out to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src37_src.reg
[Sun Jun 24 19:48:35 2012] Extracting stamp from image fullrun_mos2_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (294, 165) - (336, 207)
[Sun Jun 24 19:48:35 2012] XMMSAS bgd. selection expression = annulus(27368.961562, 16169.991200, 608.273018, 1216.546035, X, Y) && !ellipse(28950.707000, 16379.075800, 378.079211, 378.079211, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src37.gif
[Sun Jun 24 19:52:57 2012] Mean detx,y = (-7029.66, -7102.56) 
[Sun Jun 24 19:52:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:53:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:53:14 2012] Setting source spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jun 24 19:53:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jun 24 20:18:23 2012] Not generating rmf since there are only 35 counts
[Sun Jun 24 20:18:23 2012] rmf not generated due to insufficient counts
[Sun Jun 24 20:21:03 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:03 2012] Error reading totcts from fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jun 24 20:21:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:03 2012] Using photon index=1.80, rate=0.00061, arf fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src37.arf
[Sun Jun 24 20:21:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:03 2012] Updating source flux to 1.2e-14
[Sun Jun 24 20:21:56 2012] Source 37 has fewer than 100.000000 counts, skipping spectral fitting