[Sun Jun 24 10:28:57 2012] Detection parameters:
  Position = (379.0, 275.2) = 1 16 0.77 -47 24 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.8 +/- 10.7
  Background counts = 25.5
  Rate = 0.0009 +/- 0.0002

[Sun Jun 24 10:28:57 2012] Off-axis axis estimate = 6.08'
[Sun Jun 24 13:36:09 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:36:09 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Sun Jun 24 13:36:09 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.256
[Sun Jun 24 13:36:09 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 9.47"
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src32.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src32.csv
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src32.csv
[Sun Jun 24 14:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:22 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun Jun 24 14:30:22 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Jun 24 14:30:22 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Sun Jun 24 14:30:51 2012] Spatial fit model total counts = 279.964000, observed total counts = 280.000000
[Sun Jun 24 14:30:51 2012] Offset between fit and detection position for source 30 = 0.048675 pixels
[Sun Jun 24 14:30:51 2012] 280.380100 total counts/ 250.695000 bgd. counts: snr = 1.874846
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.048675 pixels
  Position = (379.0, 275.1) = 1 16 0.80 -47 24 39.8
  Extent = 4.7 (2.9-6.9)", rotation angle = 0
  Source counts = 29.7 +/- 16.7
  Background counts = 250.7
  Rate = 0.0005 +/- 0.0003
[Sun Jun 24 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 14:30:51 2012] Source does appear to be extended
[Sun Jun 24 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:19:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:19:34 2012] Initial guess for spatial extent in simple fitting = 4.71"
[Sun Jun 24 17:19:34 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.197
[Sun Jun 24 17:19:34 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 4.71"
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src32.ximg exists
[Sun Jun 24 18:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src32.csv
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Jun 24 18:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src32.csv
[Sun Jun 24 18:06:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Jun 24 18:06:16 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sun Jun 24 18:06:40 2012] Spatial fit model total counts = 279.952000, observed total counts = 280.000000
[Sun Jun 24 18:06:40 2012] Offset between fit and detection position for source 30 = 0.002632 pixels
[Sun Jun 24 18:06:40 2012] 280.368100 total counts/ 250.657000 bgd. counts: snr = 1.876631
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.002632 pixels
  Position = (379.0, 275.1) = 1 16 0.80 -47 24 39.8
  Extent = 4.7 (2.9-6.9)", rotation angle = 0
  Source counts = 29.7 +/- 16.7
  Background counts = 250.7
  Rate = 0.0005 +/- 0.0003
[Sun Jun 24 18:06:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:40 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 18:06:40 2012] Source does appear to be extended
[Sun Jun 24 18:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:48:35 2012] XMMSAS src. selection expression = ellipse(32922.243640, 23889.143400, 283.138208, 283.138208, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing source region out to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src30_src.reg
[Sun Jun 24 19:48:35 2012] Extracting stamp from image fullrun_mos2_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (363, 259) - (395, 291)
[Sun Jun 24 19:48:35 2012] XMMSAS bgd. selection expression = annulus(32922.243640, 23889.143400, 471.897014, 943.794027, X, Y)
[Sun Jun 24 19:48:35 2012] Writing fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src30.gif
[Sun Jun 24 19:56:42 2012] Mean detx,y = (-4991.68, 2224.77) 
[Sun Jun 24 19:56:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:56:48 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:56:48 2012] Setting source spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun 24 19:56:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jun 24 20:19:29 2012] Not generating rmf since there are only 29 counts
[Sun Jun 24 20:19:29 2012] rmf not generated due to insufficient counts
[Sun Jun 24 20:21:03 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:03 2012] Error reading totcts from fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun 24 20:21:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:04 2012] Using photon index=1.80, rate=0.000507, arf fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src30.arf
[Sun Jun 24 20:21:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:04 2012] Updating source flux to 8.9e-15
[Sun Jun 24 20:21:56 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting