[Sun Jun 24 10:28:55 2012] Detection parameters:
  Position = (195.3, 303.0) = 1 17 19.49 -47 22 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 715.8 +/- 32.5
  Background counts = 20.0
  Rate = 0.02 +/- 0.001

[Sun Jun 24 10:28:57 2012] Off-axis axis estimate = 7.49'
[Sun Jun 24 13:36:09 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:36:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 13:36:09 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Jun 24 13:36:09 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.931
[Sun Jun 24 13:36:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.17"
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 14:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 14:30:21 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 14:30:51 2012] Spatial fit model total counts = 950.093000, observed total counts = 950.000000
[Sun Jun 24 14:30:51 2012] Offset between fit and detection position for source 3 = 0.165792 pixels
[Sun Jun 24 14:30:51 2012] 957.372000 total counts/ 452.781000 bgd. counts: snr = 23.713486
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.165792 pixels
  Position = (195.4, 302.8) = 1 17 19.45 -47 22 39.2
  Extent = 5.2 (4.8-5.8)", rotation angle = 0
  Source counts = 504.6 +/- 30.9
  Background counts = 452.8
  Rate = 0.009 +/- 0.0005
[Sun Jun 24 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 14:30:51 2012] Source does appear to be extended
[Sun Jun 24 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:19:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:19:34 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Sun Jun 24 17:19:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 11, frac = 0.958
[Sun Jun 24 17:19:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.20"
[Sun Jun 24 18:06:15 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 18:06:15 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 18:06:15 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 18:06:16 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 24 18:06:40 2012] Spatial fit model total counts = 847.571000, observed total counts = 846.000000
[Sun Jun 24 18:06:40 2012] Offset between fit and detection position for source 3 = 0.002672 pixels
[Sun Jun 24 18:06:40 2012] 851.333000 total counts/ 354.333000 bgd. counts: snr = 26.402837
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002672 pixels
  Position = (195.4, 302.8) = 1 17 19.45 -47 22 39.2
  Extent = 5.1 (4.7-5.6)", rotation angle = 0
  Source counts = 497.0 +/- 29.2
  Background counts = 354.3
  Rate = 0.008 +/- 0.0005
[Sun Jun 24 18:06:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:40 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 18:06:40 2012] Source does appear to be extended
[Sun Jun 24 18:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:48:35 2012] XMMSAS src. selection expression = ellipse(16947.500000, 26297.196200, 307.119609, 307.119609, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing source region out to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 24 19:48:35 2012] Extracting stamp from image fullrun_mos2_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (178, 285) - (213, 320)
[Sun Jun 24 19:48:35 2012] XMMSAS bgd. selection expression = annulus(16947.500000, 26297.196200, 511.866015, 1023.732029, X, Y) && !ellipse(17618.424698, 24717.448669, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3.gif
[Sun Jun 24 19:48:39 2012] Mean detx,y = (7472.18, -8031.52) 
[Sun Jun 24 19:48:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:48:47 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:48:48 2012] Setting source spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 24 19:48:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 24 20:21:03 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:03 2012] Error reading totcts from fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 24 20:21:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:03 2012] Using photon index=1.80, rate=0.00848, arf fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3.arf
[Sun Jun 24 20:21:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:03 2012] Updating source flux to 2.3e-13
[Sun Jun 24 20:22:30 2012] Reading fit data from xmm0601260101/analysis//spectral/fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jun 24 20:22:30 2012] Spectral fit parameter nH value = 1.41141e+20
[Sun Jun 24 20:22:30 2012] Spectral fit parameter PhoIndex value = 2.15355
[Sun Jun 24 20:22:30 2012] Failed to get F(0.3-8.0) from xmm0601260101/analysis//spectral/fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 20:22:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:22:30 2012] Using Nh = 1.4e+20, photon index=2.15, rate=0.00848, arf fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src3.arf
[Sun Jun 24 20:22:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:22:30 2012] Updating source flux to 2e-13