[Sun Jun 24 10:28:55 2012] Detection parameters:
  Position = (394.9, 179.3) = 1 15 53.87 -47 31 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 436.4 +/- 26.5
  Background counts = 21.7
  Rate = 0.01 +/- 0.0009

[Sun Jun 24 10:28:57 2012] Off-axis axis estimate = 11.11'
[Sun Jun 24 13:36:09 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:36:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 13:36:09 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Sun Jun 24 13:36:09 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.991
[Sun Jun 24 13:36:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.98"
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src3.csv
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 24 14:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src3.csv
[Sun Jun 24 14:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 24 14:30:21 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 24 14:30:21 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 24 14:30:51 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Sun Jun 24 14:30:51 2012] Source 2 is offset by -1.458105 and 1.028891 pixels which is larger than
2 X fitted extent = 1.344037 x 1.344037, not incorporating fit results
[Sun Jun 24 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:51 2012] Assessing source extent using major
[Sun Jun 24 14:30:51 2012] Source does appear to be extended
[Sun Jun 24 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 17:19:34 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 17:19:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 17:19:34 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Sun Jun 24 17:19:34 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.991
[Sun Jun 24 17:19:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.98"
[Sun Jun 24 18:06:15 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 24 18:06:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src3.csv
[Sun Jun 24 18:06:15 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 24 18:06:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src3.csv
[Sun Jun 24 18:06:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 24 18:06:16 2012] fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 24 18:06:16 2012] Fit fullrun_mos2_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 24 18:06:40 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.477390 pixels away
[Sun Jun 24 18:06:40 2012] Source 2 is offset by -1.432151 and 1.028891 pixels which is larger than
2 X fitted extent = 1.336497 x 1.336497, not incorporating fit results
[Sun Jun 24 18:06:40 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:40 2012] Assessing source extent using major
[Sun Jun 24 18:06:40 2012] Source does appear to be extended
[Sun Jun 24 18:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:48:35 2012] XMMSAS src. selection expression = ellipse(34309.312836, 15553.811523, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing source region out to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 24 19:48:35 2012] Extracting stamp from image fullrun_mos2_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (357, 142) - (432, 217)
[Sun Jun 24 19:48:35 2012] XMMSAS bgd. selection expression = annulus(34309.312836, 15553.811523, 1087.500000, 2175.000000, X, Y) && !ellipse(33908.897247, 16334.643692, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 19:48:35 2012] Writing fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src2.gif
[Sun Jun 24 19:49:06 2012] Mean detx,y = (-12118.08, -2313.72) 
[Sun Jun 24 19:49:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:49:16 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:49:16 2012] Setting source spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 24 19:49:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 24 20:02:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 20:02:10 2012] rmf not generated due to insufficient counts
[Sun Jun 24 20:21:03 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:03 2012] Error reading totcts from fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 24 20:21:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:03 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos2_xmm0601260101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 24 20:21:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:03 2012] Updating source flux to 2.7e-13
[Sun Jun 24 20:21:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting