[Sun Jun 24 10:28:21 2012] Detection parameters:
  Position = (394.6, 179.2) = 1 15 54.02 -47 31 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 432.5 +/- 26.1
  Background counts = 24.8
  Rate = 0.01 +/- 0.0009

[Sun Jun 24 10:28:23 2012] Off-axis axis estimate = 11.10'
[Sun Jun 24 12:07:33 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 12:07:33 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Sun Jun 24 12:07:33 2012] source mask rpix=2.8, npix_max = 42, mask sum = 40, frac = 0.944
[Sun Jun 24 12:07:33 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.98"
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src2.csv
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src2.csv
[Sun Jun 24 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 24 13:36:08 2012] Fit fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jun 24 14:30:44 2012] Warning, spatial fit 2 centroid is now closest to src. 17
[Sun Jun 24 14:30:44 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:44 2012] Assessing source extent using major
[Sun Jun 24 14:30:44 2012] Source does appear to be extended
[Sun Jun 24 14:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 15:52:58 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:52:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 15:52:58 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Sun Jun 24 15:52:58 2012] source mask rpix=2.8, npix_max = 42, mask sum = 40, frac = 0.944
[Sun Jun 24 15:52:58 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.98"
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 24 17:19:33 2012] Fit fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 24 17:19:34 2012] Fit fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jun 24 18:06:34 2012] Spatial fit model total counts = 684.071000, observed total counts = 665.000000
[Sun Jun 24 18:06:34 2012] Offset between fit and detection position for source 3 = 0.169832 pixels
[Sun Jun 24 18:06:34 2012] 681.089000 total counts/ 384.439000 bgd. counts: snr = 15.129711
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.169832 pixels
  Position = (394.6, 179.4) = 1 15 54.01 -47 31 36.2
  Extent = 6.9" x 4.5", rotation angle = 332
  Source counts = 296.6 +/- 26.1
  Background counts = 384.4
  Rate = 0.005 +/- 0.0004
[Sun Jun 24 18:06:34 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:34 2012] Assessing source extent using major
[Sun Jun 24 18:06:34 2012] Source does appear to be extended
[Sun Jun 24 18:06:34 2012] Computing asymmetry using major and minor axis, asym = 1.52
[Sun Jun 24 18:06:34 2012] Source is asymmetric
[Sun Jun 24 19:13:14 2012] XMMSAS src. selection expression = ellipse(34281.280206, 15558.575286, 412.964441, 271.933899, 332.399593, X, Y)
[Sun Jun 24 19:13:14 2012] Writing source region out to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 24 19:13:14 2012] Extracting stamp from image fullrun_mos1_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (371, 156) - (418, 203)
[Sun Jun 24 19:13:14 2012] XMMSAS bgd. selection expression = annulus(34281.280206, 15558.575286, 688.274068, 1376.548136, X, Y) && !ellipse(33919.436400, 16314.907600, 409.893612, 409.893612, 0.000000, X, Y)
[Sun Jun 24 19:13:14 2012] Writing fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3.gif
[Sun Jun 24 19:13:36 2012] Mean detx,y = (-2190.53, 11921.80) 
[Sun Jun 24 19:13:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:13:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:13:44 2012] Setting source spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 24 19:13:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 24 20:21:02 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:02 2012] Error reading totcts from fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 24 20:21:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:02 2012] Using photon index=1.80, rate=0.00506, arf fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3.arf
[Sun Jun 24 20:21:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:02 2012] Updating source flux to 1.1e-13
[Sun Jun 24 20:21:56 2012] Reading fit data from xmm0601260101/analysis//spectral/fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jun 24 20:21:56 2012] Spectral fit parameter nH value = 3.32926e+13
[Sun Jun 24 20:21:56 2012] Spectral fit parameter PhoIndex value = 2.07003
[Sun Jun 24 20:21:56 2012] Failed to get F(0.3-8.0) from xmm0601260101/analysis//spectral/fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 20:21:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:56 2012] Using Nh = 3.3e+13, photon index=2.07, rate=0.00506, arf fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src3.arf
[Sun Jun 24 20:21:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:56 2012] Updating source flux to 9.6e-14