[Sun Jun 24 10:28:22 2012] Detection parameters:
  Position = (469.4, 326.3) = 1 15 22.12 -47 20 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 11.2
  Background counts = 29.5
  Rate = 0.0008 +/- 0.0002

[Sun Jun 24 10:28:23 2012] Off-axis axis estimate = 12.56'
[Sun Jun 24 12:07:33 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:07:33 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Sun Jun 24 12:07:33 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.982
[Sun Jun 24 12:07:33 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 12.71"
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src36.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src36.csv
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src36.csv
[Sun Jun 24 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Jun 24 13:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Jun 24 13:36:09 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Jun 24 13:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Jun 24 13:36:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:44 2012] Source 27 is offset by -2.170112 and -1.963533 pixels which is larger than
2 X fitted extent = 1.532510 x 1.532510, not incorporating fit results
[Sun Jun 24 14:30:44 2012] Spatial fit model total counts = 561.872000, observed total counts = 491.000000
[Sun Jun 24 14:30:44 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 14:30:44 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:44 2012] Assessing source extent using major
[Sun Jun 24 14:30:44 2012] Source does appear to be extended
[Sun Jun 24 14:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 15:52:58 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:52:58 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Sun Jun 24 15:52:58 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.982
[Sun Jun 24 15:52:58 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 12.71"
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src35.ximg exists
[Sun Jun 24 17:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src35.csv
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Jun 24 17:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src35.csv
[Sun Jun 24 17:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Jun 24 17:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Jun 24 17:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 24 17:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 18:06:34 2012] Spatial fit model total counts = 671.417000, observed total counts = 616.000000
[Sun Jun 24 18:06:34 2012] Offset between fit and detection position for source 27 = 2.172245 pixels
[Sun Jun 24 18:06:34 2012] Warning, changing simple spatial fit ID from 35 to 30
[Sun Jun 24 18:06:34 2012] 689.247000 total counts/ 317.890000 bgd. counts: snr = 20.828269
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.172245 pixels
  Position = (468.8, 324.2) = 1 15 22.37 -47 21 5.3
  Extent = 25.9 (17.5-51.9)", rotation angle = 0
  Source counts = 371.4 +/- 26.3
  Background counts = 317.9
  Rate = 0.006 +/- 0.0004
[Sun Jun 24 18:06:34 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:34 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 18:06:34 2012] Source does appear to be extended
[Sun Jun 24 18:06:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 18:06:34 2012] Source is confused with source 26
[Sun Jun 24 19:13:15 2012] XMMSAS src. selection expression = ellipse(40740.706000, 28156.388000, 1556.898045, 1556.898045, 0.000000, X, Y)
[Sun Jun 24 19:13:15 2012] Writing source region out to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 24 19:13:15 2012] Extracting stamp from image fullrun_mos1_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (379, 235) - (558, 414)
[Sun Jun 24 19:13:15 2012] XMMSAS bgd. selection expression = annulus(40740.706000, 28156.388000, 2594.830075, 5189.660149, X, Y) && !ellipse(37313.350200, 24573.991800, 333.894410, 333.894410, 0.000000, X, Y) && !ellipse(38358.577667, 27474.064697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40229.043152, 30390.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42319.687561, 29167.606995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34877.279358, 22250.467133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42608.272000, 28510.270000, 2219.704064, 2219.704064, 0.000000, X, Y) && !ellipse(43687.048889, 27759.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41392.458405, 28607.624146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42065.455231, 29519.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38910.433320, 31635.465000, 440.904013, 440.904013, 0.000000, X, Y)
[Sun Jun 24 19:13:15 2012] Writing fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src27.gif
[Sun Jun 24 19:22:38 2012] Mean detx,y = (11124.74, 7210.42) 
[Sun Jun 24 19:22:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:23:21 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:23:21 2012] Setting source spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 19:23:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 24 20:21:02 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:02 2012] Error reading totcts from fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 20:21:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:03 2012] Using photon index=1.80, rate=0.00634, arf fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src27.arf
[Sun Jun 24 20:21:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:03 2012] Updating source flux to 1.1e-13
[Sun Jun 24 20:21:05 2012] Flag b found in src. 27 procflags, skipping spectral fitting
[Sun Jun 24 20:21:05 2012] Flag p found in src. 27 procflags, skipping spectral fitting
[Sun Jun 24 20:21:05 2012] Flag c found in src. 27 procflags, skipping spectral fitting