[Sun Jun 24 10:28:22 2012] Detection parameters:
  Position = (476.3, 329.4) = 1 15 19.17 -47 20 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.3 +/- 12.5
  Background counts = 30.9
  Rate = 0.0009 +/- 0.0002

[Sun Jun 24 10:28:23 2012] Off-axis axis estimate = 13.09'
[Sun Jun 24 12:07:33 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:07:33 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Sun Jun 24 12:07:33 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Sun Jun 24 12:07:33 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.97"
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src31.csv
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src31.csv
[Sun Jun 24 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun 24 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:44 2012] Spatial fit model total counts = -155.862000, observed total counts = 645.000000
[Sun Jun 24 14:30:44 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 14:30:44 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.946872 pixels away
[Sun Jun 24 14:30:44 2012] Warning, spatial fit 31 centroid is now closest to src. 8
[Sun Jun 24 14:30:44 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:44 2012] Assessing source extent using major
[Sun Jun 24 14:30:44 2012] Source does appear to be extended
[Sun Jun 24 14:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 14:30:44 2012] Source is confused with source 10
[Sun Jun 24 15:52:58 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:52:58 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Sun Jun 24 15:52:58 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.010
[Sun Jun 24 15:52:58 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 12.97"
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun 24 17:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src30.csv
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun 24 17:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src30.csv
[Sun Jun 24 17:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun 24 17:19:34 2012] Fit fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jun 24 18:06:34 2012] Spatial fit model total counts = -667.944000, observed total counts = 645.000000
[Sun Jun 24 18:06:34 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 18:06:34 2012] Warning, spatial fit 30 centroid is now closest to src. 27
[Sun Jun 24 18:06:34 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:34 2012] Assessing source extent using major
[Sun Jun 24 18:06:34 2012] Source does appear to be extended
[Sun Jun 24 18:06:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:13:14 2012] XMMSAS src. selection expression = ellipse(41392.458405, 28607.624146, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 19:13:14 2012] Writing source region out to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 24 19:13:14 2012] Extracting stamp from image fullrun_mos1_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (439, 292) - (514, 367)
[Sun Jun 24 19:13:14 2012] XMMSAS bgd. selection expression = annulus(41392.458405, 28607.624146, 1087.500000, 2175.000000, X, Y) && !ellipse(38358.577667, 27474.064697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40229.043152, 30390.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42319.687561, 29167.606995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42608.272000, 28510.270000, 2219.704064, 2219.704064, 0.000000, X, Y) && !ellipse(43687.048889, 27759.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42065.455231, 29519.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40740.706000, 28156.388000, 2075.864060, 2075.864060, 0.000000, X, Y)
[Sun Jun 24 19:13:14 2012] Writing fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src26.gif
[Sun Jun 24 19:21:26 2012] Mean detx,y = (11855.69, 7068.02) 
[Sun Jun 24 19:21:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:21:33 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:21:33 2012] Setting source spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 24 19:21:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 24 19:44:15 2012] Not generating rmf since there are only 50 counts
[Sun Jun 24 19:44:15 2012] rmf not generated due to insufficient counts
[Sun Jun 24 20:21:02 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:02 2012] Error reading totcts from fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 24 20:21:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:03 2012] Using photon index=1.80, rate=0.000859, arf fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src26.arf
[Sun Jun 24 20:21:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:03 2012] Updating source flux to 1.8e-14
[Sun Jun 24 20:21:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting