[Sun Jun 24 10:28:22 2012] Detection parameters:
  Position = (493.2, 329.4) = 1 15 11.96 -47 20 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.7 +/- 13.4
  Background counts = 35.9
  Rate = 0.001 +/- 0.0002

[Sun Jun 24 10:28:23 2012] Off-axis axis estimate = 14.30'
[Sun Jun 24 12:07:33 2012] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 12:07:33 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Sun Jun 24 12:07:33 2012] source mask rpix=3.1, npix_max = 52, mask sum = 43, frac = 0.820
[Sun Jun 24 12:07:33 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.58"
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src24.csv
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src24.csv
[Sun Jun 24 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 24 13:36:08 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 24 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 24 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:30:44 2012] Warning, spatial fit 24 centroid is now closest to src. 26
[Sun Jun 24 14:30:44 2012] Spatial fit model total counts = 563.271000, observed total counts = 620.000000
[Sun Jun 24 14:30:44 2012] Offset between fit and detection position for source 10 = 3.095098 pixels
[Sun Jun 24 14:30:44 2012] Warning, changing simple spatial fit ID from 24 to 29
[Sun Jun 24 14:30:44 2012] 418.053000 total counts/ 177.204000 bgd. counts: snr = 18.092896
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.095098 pixels
  Position = (490.3, 328.3) = 1 15 13.19 -47 20 47.2
  Extent = 27.7 (27.1-55.5)", rotation angle = 0
  Source counts = 240.8 +/- 20.4
  Background counts = 177.2
  Rate = 0.004 +/- 0.0003
[Sun Jun 24 14:30:44 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:30:44 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 14:30:44 2012] Source does appear to be extended
[Sun Jun 24 14:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 14:30:44 2012] Source is confused with source 9
[Sun Jun 24 15:52:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:52:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 15:52:58 2012] Initial guess for spatial extent in simple fitting = 27.75"
[Sun Jun 24 15:52:58 2012] source mask rpix=6.4, npix_max = 189, mask sum = 181, frac = 0.956
[Sun Jun 24 15:52:58 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 27.75"
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun 24 17:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src24.csv
[Sun Jun 24 17:19:33 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun 24 17:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src24.csv
[Sun Jun 24 17:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun 24 17:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Jun 24 17:19:34 2012] fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun 24 17:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Jun 24 17:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601260101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 18:06:34 2012] Warning, spatial fit 24 centroid is now closest to src. 11
[Sun Jun 24 18:06:34 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 18:06:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 18:06:34 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 18:06:34 2012] Source does appear to be extended
[Sun Jun 24 18:06:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 19:13:14 2012] XMMSAS src. selection expression = ellipse(42608.272000, 28510.270000, 1664.778048, 1664.778048, 0.000000, X, Y)
[Sun Jun 24 19:13:14 2012] Writing source region out to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 24 19:13:14 2012] Extracting stamp from image fullrun_mos1_xmm0601260101_pi300-10000_cl_sm2.00.img.gz, (395, 233) - (586, 424)
[Sun Jun 24 19:13:14 2012] XMMSAS bgd. selection expression = annulus(42608.272000, 28510.270000, 2774.630080, 5549.260160, X, Y) && !ellipse(37313.350200, 24573.991800, 333.894410, 333.894410, 0.000000, X, Y) && !ellipse(38358.577667, 27474.064697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36276.673615, 34463.208954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40229.043152, 30390.991394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42319.687561, 29167.606995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43687.048889, 27759.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41392.458405, 28607.624146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42065.455231, 29519.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38910.433320, 31635.465000, 440.904013, 440.904013, 0.000000, X, Y) && !ellipse(40740.706000, 28156.388000, 2075.864060, 2075.864060, 0.000000, X, Y)
[Sun Jun 24 19:13:14 2012] Writing fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src10.gif
[Sun Jun 24 19:18:58 2012] Mean detx,y = (12301.64, 7987.29) 
[Sun Jun 24 19:18:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 19:19:51 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 19:19:52 2012] Setting source spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 19:19:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 24 20:21:02 2012] Updating aperture counts using extracted products
[Sun Jun 24 20:21:02 2012] Error reading totcts from fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 20:21:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 20:21:02 2012] Using photon index=1.80, rate=0.00411, arf fullrun_mos1_xmm0601260101_pi300-10000_pass1_cl_src10.arf
[Sun Jun 24 20:21:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 20:21:02 2012] Updating source flux to 8.4e-14
[Sun Jun 24 20:21:05 2012] Flag c found in src. 10 procflags, skipping spectral fitting