[Wed May 15 07:50:49 2013] Detection parameters:
  Position = (161.3, 294.5) = 0 55 52.04 -73 31 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.8 +/- 19.9
  Background counts = 58.7
  Rate = 0.003 +/- 0.0005

[Wed May 15 07:50:51 2013] Off-axis axis estimate = 9.95'
[Wed May 15 07:51:23 2013] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:23 2013] Initial guess for spatial extent in simple fitting = 11.40"
[Wed May 15 07:51:23 2013] source mask rpix=2.6, npix_max = 38, mask sum = 37, frac = 0.949
[Wed May 15 07:51:23 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.40"
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src4.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src4.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:38 2013] Source 4 is offset by -0.553057 and -5.946116 pixels which is larger than
2 X fitted extent = 1.310708 x 1.399494, not incorporating fit results
[Wed May 15 07:51:38 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:38 2013] Assessing source extent using major
[Wed May 15 07:51:38 2013] Source does appear to be extended
[Wed May 15 07:51:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:04 2013] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:04 2013] Initial guess for spatial extent in simple fitting = 11.40"
[Wed May 15 07:52:04 2013] source mask rpix=2.6, npix_max = 38, mask sum = 37, frac = 0.949
[Wed May 15 07:52:04 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.40"
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 15 07:52:05 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src4.csv
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 15 07:52:05 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src4.csv
[Wed May 15 07:52:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 15 07:52:05 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 15 07:52:05 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 15 07:52:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:17 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.762508 pixels away
[Wed May 15 07:52:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:17 2013] Assessing source extent using major
[Wed May 15 07:52:17 2013] Source does appear to be extended
[Wed May 15 07:52:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:42 2013] XMMSAS src. selection expression = ellipse(13981.487244, 25571.499908, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Not overwriting source region fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src.reg
[Wed May 15 07:52:42 2013] Extracting stamp from image fullrun_pn_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (124, 257) - (199, 332)
[Wed May 15 07:52:42 2013] XMMSAS bgd. selection expression = annulus(13981.487244, 25571.499908, 1087.500000, 2175.000000, X, Y)
[Wed May 15 07:52:42 2013] Writing fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4.gif
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed May 15 07:52:43 2013] Mean detx,y = (3714.53, 12435.55) 
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src.img and ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed May 15 07:52:43 2013] Setting source spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 15 07:52:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed May 15 07:52:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 07:52:53 2013] rmf not generated due to insufficient counts
[Wed May 15 07:52:53 2013] fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Wed May 15 08:06:21 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:21 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 696.00
[Wed May 15 08:06:21 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_bgd.pi.gz = 2419.00
[Wed May 15 08:06:21 2013] Got source and background scale factors 1047455.000000, 9131874.000000
[Wed May 15 08:06:21 2013] User source parameters:
  Position = (161.3, 294.5) = 0 55 52.04 -73 31 20.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 418.5 +/- 27.4
  Background aperture counts = 277.5
  Rate = 0.01 +/- 0.0007

[Wed May 15 08:06:21 2013] Updating counts from extracted products
[Wed May 15 08:06:21 2013] Set source signif. to 418.53/16.66 = 25.13
[Wed May 15 08:06:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:25 2013] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4.arf
[Wed May 15 08:06:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:25 2013] Updating source flux to 1e-13
[Wed May 15 08:06:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:42 2013] xmm0601213001/analysis//spectral/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete