[Wed May 15 07:50:49 2013] Detection parameters:
  Position = (445.4, 433.0) = 0 51 2.96 -73 21 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1971.2 +/- 57.9
  Background counts = 72.6
  Rate = 0.05 +/- 0.001

[Wed May 15 07:50:51 2013] Off-axis axis estimate = 14.45'
[Wed May 15 07:51:23 2013] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 07:51:23 2013] Initial guess for spatial extent in simple fitting = 13.65"
[Wed May 15 07:51:23 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.058
[Wed May 15 07:51:23 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.65"
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 15 07:51:24 2013] Fit fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 15 07:51:38 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.751861 pixels away
[Wed May 15 07:51:38 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:38 2013] Assessing source extent using major
[Wed May 15 07:51:38 2013] Source does appear to be extended
[Wed May 15 07:51:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:51:38 2013] Source is confused with source 1
[Wed May 15 07:52:04 2013] Using EEF radius (= 13.65 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:04 2013] Initial guess for spatial extent in simple fitting = 13.65"
[Wed May 15 07:52:04 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.058
[Wed May 15 07:52:04 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 13.65"
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 15 07:52:05 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 15 07:52:05 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 07:52:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 15 07:52:05 2013] Fit fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 15 07:52:17 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.757799 pixels away
[Wed May 15 07:52:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:17 2013] Assessing source extent using major
[Wed May 15 07:52:17 2013] Source does appear to be extended
[Wed May 15 07:52:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:42 2013] Counts = 1971.247437, rescaling region sizes by 2.000000
[Wed May 15 07:52:42 2013] XMMSAS src. selection expression = ellipse(38701.453461, 37621.037079, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Not overwriting source region fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src.reg
[Wed May 15 07:52:42 2013] Extracting stamp from image fullrun_pn_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (370, 358) - (520, 508)
[Wed May 15 07:52:42 2013] XMMSAS bgd. selection expression = annulus(38701.453461, 37621.037079, 4350.000000, 8700.000000, X, Y) && !ellipse(38331.612500, 37567.295200, 2640.208076, 2640.208076, 0.000000, X, Y) && !ellipse(30867.165588, 29677.173492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40090.181828, 28530.388168, 680.711022, 229.210431, 89.972707, X, Y) && !ellipse(32554.314575, 40394.698395, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Writing fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3.gif
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed May 15 07:52:43 2013] Mean detx,y = (-16702.51, -5675.84) 
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src.img and ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed May 15 07:52:43 2013] Setting source spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 15 07:52:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 15 07:52:43 2013] ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed May 15 07:52:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 07:52:53 2013] rmf not generated due to insufficient counts
[Wed May 15 07:52:53 2013] fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Wed May 15 08:06:21 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:21 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 10878.00
[Wed May 15 08:06:21 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 20951.00
[Wed May 15 08:06:21 2013] Got source and background scale factors 5358400.000000, 83256396.000000
[Wed May 15 08:06:21 2013] User source parameters:
  Position = (445.4, 433.0) = 0 51 2.96 -73 21 31.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 9529.6 +/- 105.3
  Background aperture counts = 1348.4
  Rate = 0.2 +/- 0.003

[Wed May 15 08:06:21 2013] Updating counts from extracted products
[Wed May 15 08:06:21 2013] Set source signif. to 9529.59/36.72 = 259.52
[Wed May 15 08:06:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:25 2013] Using photon index=1.80, rate=0.244, arf fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3.arf
[Wed May 15 08:06:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:25 2013] Updating source flux to 3.6e-12
[Wed May 15 08:06:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:42 2013] xmm0601213001/analysis//spectral/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete