[Wed May 15 07:50:50 2013] Detection parameters:
  Position = (353.0, 247.2) = 0 52 35.83 -73 35 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.2 +/- 21.6
  Background counts = 55.6
  Rate = 0.008 +/- 0.0008

[Wed May 15 07:50:51 2013] Off-axis axis estimate = 5.42'
[Wed May 15 07:51:23 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:23 2013] Initial guess for spatial extent in simple fitting = 9.14"
[Wed May 15 07:51:23 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.108
[Wed May 15 07:51:23 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.14"
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src19.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src19.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src19.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:38 2013] Source 19 is offset by -4.075459 and -5.752467 pixels which is larger than
2 X fitted extent = 1.005816 x 1.005816, not incorporating fit results
[Wed May 15 07:51:38 2013] Warning, spatial fit 19 centroid is now closest to src. 18
[Wed May 15 07:51:38 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:38 2013] Assessing source extent using major
[Wed May 15 07:51:38 2013] Source does appear to be extended
[Wed May 15 07:51:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:04 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:04 2013] Initial guess for spatial extent in simple fitting = 9.14"
[Wed May 15 07:52:04 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.108
[Wed May 15 07:52:04 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.14"
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 15 07:52:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src14.csv
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 15 07:52:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src14.csv
[Wed May 15 07:52:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 15 07:52:05 2013] Fit fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed May 15 07:52:17 2013] Spatial fit model total counts = 722.103000, observed total counts = 660.000000
[Wed May 15 07:52:17 2013] Offset between fit and detection position for source 19 = 0.223639 pixels
[Wed May 15 07:52:17 2013] 728.041000 total counts/ 534.775000 bgd. counts: snr = 8.357375
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.223639 pixels
  Position = (352.8, 247.3) = 0 52 36.05 -73 35 1.2
  Extent = 7.2 (5.8-8.4)", rotation angle = 0
  Source counts = 193.3 +/- 27.0
  Background counts = 534.8
  Rate = 0.005 +/- 0.0007
[Wed May 15 07:52:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:17 2013] Assessing source extent using major axis lower bound
[Wed May 15 07:52:17 2013] Source does appear to be extended
[Wed May 15 07:52:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:42 2013] XMMSAS src. selection expression = ellipse(30641.275400, 21463.333800, 429.758412, 429.758412, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Not overwriting source region fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src.reg
[Wed May 15 07:52:42 2013] Extracting stamp from image fullrun_pn_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (328, 223) - (377, 272)
[Wed May 15 07:52:42 2013] XMMSAS bgd. selection expression = annulus(30641.275400, 21463.333800, 716.264021, 1432.528041, X, Y) && !ellipse(30378.998627, 22578.716370, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Writing fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19.gif
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Wed May 15 07:52:45 2013] Mean detx,y = (1233.75, -4603.55) 
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src.img and ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Wed May 15 07:52:45 2013] Setting source spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed May 15 07:52:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Wed May 15 07:52:53 2013] fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19.rmf exists, delete to re-create
[Wed May 15 07:52:53 2013] fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Wed May 15 08:06:23 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:23 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 348.00
[Wed May 15 08:06:23 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_bgd.pi.gz = 830.00
[Wed May 15 08:06:23 2013] Got source and background scale factors 582400.000000, 3411005.000000
[Wed May 15 08:06:23 2013] User source parameters:
  Position = (352.8, 247.3) = 0 52 36.05 -73 35 1.2
  Extent = 7.2 (5.8-8.4)", rotation angle = 0
  Source aperture counts = 206.3 +/- 19.7
  Background aperture counts = 141.7
  Rate = 0.005 +/- 0.0005

[Wed May 15 08:06:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:25 2013] Using photon index=1.80, rate=0.00494, arf fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19.arf
[Wed May 15 08:06:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:25 2013] Updating source flux to 2.8e-14
[Wed May 15 08:06:38 2013] Flag b found in src. 19 procflags, skipping spectral fitting
[Wed May 15 08:06:42 2013] xmm0601213001/analysis//spectral/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete