[Wed May 15 07:50:50 2013] Detection parameters:
  Position = (349.7, 260.1) = 0 52 39.18 -73 34 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.2 +/- 16.7
  Background counts = 54.3
  Rate = 0.006 +/- 0.0007

[Wed May 15 07:50:51 2013] Off-axis axis estimate = 4.64'
[Wed May 15 07:51:23 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:23 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed May 15 07:51:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.713
[Wed May 15 07:51:23 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.75"
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src18.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src18.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src18.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed May 15 07:51:24 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May 15 07:51:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed May 15 07:51:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:38 2013] Warning, spatial fit 18 centroid is now closest to src. 19
[Wed May 15 07:51:38 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.230156 pixels away
[Wed May 15 07:51:38 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:38 2013] Assessing source extent using major
[Wed May 15 07:51:38 2013] Source does appear to be extended
[Wed May 15 07:51:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:04 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:04 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed May 15 07:52:04 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.713
[Wed May 15 07:52:04 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 8.75"
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 15 07:52:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src13.csv
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 15 07:52:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src13.csv
[Wed May 15 07:52:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 15 07:52:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 15 07:52:05 2013] fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 15 07:52:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 15 07:52:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:17 2013] Source 18 is offset by 4.507478 and -5.875881 pixels which is larger than
2 X fitted extent = 1.005816 x 1.005816, not incorporating fit results
[Wed May 15 07:52:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:17 2013] Assessing source extent using major
[Wed May 15 07:52:17 2013] Source does appear to be extended
[Wed May 15 07:52:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:42 2013] XMMSAS src. selection expression = ellipse(30378.998627, 22578.716370, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Not overwriting source region fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src.reg
[Wed May 15 07:52:42 2013] Extracting stamp from image fullrun_pn_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (312, 223) - (387, 298)
[Wed May 15 07:52:42 2013] XMMSAS bgd. selection expression = annulus(30378.998627, 22578.716370, 1087.500000, 2175.000000, X, Y) && !ellipse(31627.401367, 24277.096130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30641.275400, 21463.333800, 573.011216, 573.011216, 0.000000, X, Y) && !ellipse(27301.016000, 19267.075200, 1490.448043, 1490.448043, 0.000000, X, Y)
[Wed May 15 07:52:42 2013] Writing fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18.gif
[Wed May 15 07:52:44 2013] ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0601213001/products/events/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Wed May 15 07:52:45 2013] Mean detx,y = (252.81, -3927.35) 
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src.img and ../../xmm0601213001/products/images/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Wed May 15 07:52:45 2013] Setting source spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 15 07:52:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 15 07:52:45 2013] ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Wed May 15 07:52:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 07:52:53 2013] rmf not generated due to insufficient counts
[Wed May 15 07:52:53 2013] fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Wed May 15 08:06:23 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:23 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 380.00
[Wed May 15 08:06:23 2013] Total counts from fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_bgd.pi.gz = 2191.00
[Wed May 15 08:06:23 2013] Got source and background scale factors 1056086.000000, 8773040.000000
[Wed May 15 08:06:23 2013] User source parameters:
  Position = (349.7, 260.1) = 0 52 39.18 -73 34 11.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 116.3 +/- 20.5
  Background aperture counts = 263.7
  Rate = 0.003 +/- 0.0005

[Wed May 15 08:06:23 2013] Updating counts from extracted products
[Wed May 15 08:06:23 2013] Set source signif. to 116.25/16.24 = 7.16
[Wed May 15 08:06:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:25 2013] Using photon index=1.80, rate=0.00297, arf fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18.arf
[Wed May 15 08:06:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:25 2013] Updating source flux to 1.7e-14
[Wed May 15 08:06:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:42 2013] xmm0601213001/analysis//spectral/fullrun_pn_xmm0601213001_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete