[Wed May 15 07:50:54 2013] Detection parameters:
  Position = (426.9, 431.4) = 0 51 21.67 -73 21 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.7 +/- 11.9
  Background counts = 13.8
  Rate = 0.002 +/- 0.0003

[Wed May 15 07:50:55 2013] Off-axis axis estimate = 13.41'
[Wed May 15 07:51:26 2013] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:26 2013] Initial guess for spatial extent in simple fitting = 13.13"
[Wed May 15 07:51:26 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.929
[Wed May 15 07:51:26 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.13"
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src15.csv
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src15.csv
[Wed May 15 07:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 15 07:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:50 2013] Spatial fit model total counts = -2468.660000, observed total counts = 381.000000
[Wed May 15 07:51:50 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 07:51:50 2013] Spatial fit model total counts = 467.519000, observed total counts = 270.000000
[Wed May 15 07:51:50 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 07:51:50 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:50 2013] Assessing source extent using major
[Wed May 15 07:51:50 2013] Source does appear to be extended
[Wed May 15 07:51:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:51:50 2013] Source is confused with source 5
[Wed May 15 07:52:06 2013] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:06 2013] Initial guess for spatial extent in simple fitting = 13.13"
[Wed May 15 07:52:06 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.929
[Wed May 15 07:52:06 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 13.13"
[Wed May 15 07:52:07 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 15 07:52:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src14.csv
[Wed May 15 07:52:07 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 15 07:52:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src14.csv
[Wed May 15 07:52:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:08 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 15 07:52:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 15 07:52:08 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 15 07:52:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 15 07:52:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:28 2013] Spatial fit model total counts = 245.357000, observed total counts = 381.000000
[Wed May 15 07:52:28 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 07:52:28 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 17.334289 pixels away
[Wed May 15 07:52:28 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.396938 pixels away
[Wed May 15 07:52:28 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:28 2013] Assessing source extent using major
[Wed May 15 07:52:28 2013] Source does appear to be extended
[Wed May 15 07:52:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 08:05:24 2013] XMMSAS src. selection expression = ellipse(37093.156189, 37483.559662, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 08:05:24 2013] Not overwriting source region fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src.reg
[Wed May 15 08:05:24 2013] Extracting stamp from image fullrun_mos2_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (389, 394) - (464, 469)
[Wed May 15 08:05:24 2013] XMMSAS bgd. selection expression = annulus(37093.156189, 37483.559662, 1087.500000, 2175.000000, X, Y) && !ellipse(37905.672150, 36820.920105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37543.600494, 37079.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38356.368683, 36556.311920, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 08:05:24 2013] Writing fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7.gif
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/events/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0601213001/products/events/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed May 15 08:05:25 2013] Mean detx,y = (16055.40, 4188.12) 
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/images/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src.img and ../../xmm0601213001/products/images/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/spectra/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed May 15 08:05:25 2013] Setting source spectrum file to fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May 15 08:05:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/lightcurves/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed May 15 08:05:28 2013] Not generating rmf since there are only 69 counts
[Wed May 15 08:05:28 2013] rmf not generated due to insufficient counts
[Wed May 15 08:05:28 2013] fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Wed May 15 08:06:29 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:29 2013] Total counts from fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 192.00
[Wed May 15 08:06:30 2013] Total counts from fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_bgd.pi.gz = 402.00
[Wed May 15 08:06:30 2013] Got source and background scale factors 907146.000000, 4538833.000000
[Wed May 15 08:06:30 2013] User source parameters:
  Position = (426.9, 431.4) = 0 51 21.67 -73 21 35.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 111.7 +/- 14.9
  Background aperture counts = 80.3
  Rate = 0.003 +/- 0.0004

[Wed May 15 08:06:30 2013] Updating counts from extracted products
[Wed May 15 08:06:30 2013] Set source signif. to 111.65/8.96 = 12.46
[Wed May 15 08:06:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:31 2013] Using photon index=1.80, rate=0.00268, arf fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7.arf
[Wed May 15 08:06:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:31 2013] Updating source flux to 1.6e-13
[Wed May 15 08:06:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:38 2013] xmm0601213001/analysis//spectral/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete