[Wed May 15 07:50:55 2013] Detection parameters:
  Position = (307.1, 228.0) = 0 53 22.88 -73 36 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.8 +/- 10.7
  Background counts = 19.3
  Rate = 0.001 +/- 0.0003

[Wed May 15 07:50:55 2013] Off-axis axis estimate = 5.15'
[Wed May 15 07:51:26 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:26 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Wed May 15 07:51:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.136
[Wed May 15 07:51:26 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.00"
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src20.csv
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src20.csv
[Wed May 15 07:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 15 07:51:27 2013] Fit fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed May 15 07:51:50 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.304152 pixels away
[Wed May 15 07:51:50 2013] Spatial fit model total counts = 375.167000, observed total counts = 373.000000
[Wed May 15 07:51:50 2013] Offset between fit and detection position for source 17 = 3.662567 pixels
[Wed May 15 07:51:50 2013] Warning, changing simple spatial fit ID from 20 to 22
[Wed May 15 07:51:50 2013] 368.032000 total counts/ 239.797000 bgd. counts: snr = 8.281037
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.662567 pixels
  Position = (308.7, 224.6) = 0 53 21.29 -73 36 40.1
  Extent = 18.4 (18.4-36.9)", rotation angle = 0
  Source counts = 128.2 +/- 19.2
  Background counts = 239.8
  Rate = 0.003 +/- 0.0005
[Wed May 15 07:51:50 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:50 2013] Assessing source extent using major axis lower bound
[Wed May 15 07:51:50 2013] Source does appear to be extended
[Wed May 15 07:51:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:51:50 2013] Source is confused with source 20
[Wed May 15 07:52:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 07:52:06 2013] Initial guess for spatial extent in simple fitting = 18.43"
[Wed May 15 07:52:06 2013] source mask rpix=4.2, npix_max = 89, mask sum = 81, frac = 0.903
[Wed May 15 07:52:06 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 18.43"
[Wed May 15 07:52:07 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src19.ximg exists
[Wed May 15 07:52:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src19.csv
[Wed May 15 07:52:07 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed May 15 07:52:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src19.csv
[Wed May 15 07:52:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:08 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed May 15 07:52:08 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed May 15 07:52:08 2013] Fit fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed May 15 07:52:28 2013] Spatial fit model total counts = 465.824000, observed total counts = 467.000000
[Wed May 15 07:52:28 2013] Offset between fit and detection position for source 17 = 5.768995 pixels
[Wed May 15 07:52:28 2013] Warning, changing simple spatial fit ID from 19 to 11
[Wed May 15 07:52:28 2013] 162.958800 total counts/ 89.359200 bgd. counts: snr = 7.785846
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 5.768995 pixels
  Position = (306.6, 230.0) = 0 53 23.43 -73 36 16.7
  Extent = 12.8 (2.4-18.5)", rotation angle = 0
  Source counts = 73.6 +/- 12.8
  Background counts = 89.4
  Rate = 0.002 +/- 0.0003
[Wed May 15 07:52:28 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:28 2013] Assessing source extent using major axis lower bound
[Wed May 15 07:52:28 2013] Source does appear to be extended
[Wed May 15 07:52:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 08:05:25 2013] XMMSAS src. selection expression = ellipse(26623.638000, 19962.928000, 767.214022, 767.214022, 0.000000, X, Y)
[Wed May 15 08:05:25 2013] Not overwriting source region fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src.reg
[Wed May 15 08:05:25 2013] Extracting stamp from image fullrun_mos2_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (262, 186) - (351, 274)
[Wed May 15 08:05:25 2013] XMMSAS bgd. selection expression = annulus(26623.638000, 19962.928000, 1278.690037, 2557.380074, X, Y) && !ellipse(28734.523926, 18074.410049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27061.038000, 19338.972200, 1904.392055, 1904.392055, 0.000000, X, Y) && !ellipse(25860.078000, 18908.250000, 1474.264042, 1474.264042, 0.000000, X, Y) && !ellipse(27005.658000, 19461.238000, 2133.960061, 2133.960061, 0.000000, X, Y)
[Wed May 15 08:05:25 2013] Writing fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17.gif
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/events/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0601213001/products/events/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed May 15 08:05:25 2013] Mean detx,y = (-4121.02, 1487.53) 
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/images/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src.img and ../../xmm0601213001/products/images/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/spectra/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Wed May 15 08:05:25 2013] Setting source spectrum file to fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 15 08:05:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/lightcurves/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed May 15 08:05:28 2013] Not generating rmf since there are only 73 counts
[Wed May 15 08:05:28 2013] rmf not generated due to insufficient counts
[Wed May 15 08:05:28 2013] fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Wed May 15 08:06:30 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:30 2013] Total counts from fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 312.00
[Wed May 15 08:06:30 2013] Total counts from fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_bgd.pi.gz = 540.00
[Wed May 15 08:06:30 2013] Got source and background scale factors 1751832.000000, 5639868.000000
[Wed May 15 08:06:30 2013] User source parameters:
  Position = (306.6, 230.0) = 0 53 23.43 -73 36 16.7
  Extent = 12.8 (2.4-18.5)", rotation angle = 0
  Source aperture counts = 144.3 +/- 18.7
  Background aperture counts = 167.7
  Rate = 0.003 +/- 0.0004

[Wed May 15 08:06:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:31 2013] Using photon index=1.80, rate=0.00177, arf fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17.arf
[Wed May 15 08:06:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:31 2013] Updating source flux to 2.8e-14
[Wed May 15 08:06:35 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Wed May 15 08:06:35 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 08:06:38 2013] xmm0601213001/analysis//spectral/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete