[Wed May 15 07:50:54 2013] Detection parameters:
  Position = (221.4, 256.8) = 0 54 50.74 -73 34 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.5 +/- 8.6
  Background counts = 17.0
  Rate = 0.001 +/- 0.0003

[Wed May 15 07:50:55 2013] Off-axis axis estimate = 6.34'
[Wed May 15 07:51:26 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:26 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Wed May 15 07:51:26 2013] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.716
[Wed May 15 07:51:26 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.60"
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src17.csv
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src17.csv
[Wed May 15 07:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 15 07:51:27 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 15 07:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 15 07:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:50 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.042842 pixels away
[Wed May 15 07:51:50 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:50 2013] Assessing source extent using major
[Wed May 15 07:51:50 2013] Source does appear to be extended
[Wed May 15 07:51:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:06 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:06 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Wed May 15 07:52:06 2013] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.716
[Wed May 15 07:52:06 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 9.60"
[Wed May 15 07:52:07 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src16.ximg exists
[Wed May 15 07:52:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src16.csv
[Wed May 15 07:52:07 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed May 15 07:52:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src16.csv
[Wed May 15 07:52:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:08 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed May 15 07:52:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 15 07:52:08 2013] fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed May 15 07:52:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 15 07:52:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:28 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.620963 pixels away
[Wed May 15 07:52:28 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:28 2013] Assessing source extent using major
[Wed May 15 07:52:28 2013] Source does appear to be extended
[Wed May 15 07:52:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 08:05:24 2013] XMMSAS src. selection expression = ellipse(19216.476212, 22296.932800, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 08:05:24 2013] Not overwriting source region fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src.reg
[Wed May 15 08:05:24 2013] Extracting stamp from image fullrun_mos2_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (184, 219) - (259, 294)
[Wed May 15 08:05:24 2013] XMMSAS bgd. selection expression = annulus(19216.476212, 22296.932800, 1087.500000, 2175.000000, X, Y)
[Wed May 15 08:05:24 2013] Writing fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15.gif
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/events/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0601213001/products/events/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Wed May 15 08:05:25 2013] Mean detx,y = (-4727.44, -6248.77) 
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/images/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src.img and ../../xmm0601213001/products/images/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/spectra/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Wed May 15 08:05:25 2013] Setting source spectrum file to fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 15 08:05:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 15 08:05:25 2013] ../../xmm0601213001/products/lightcurves/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Wed May 15 08:05:28 2013] Not generating rmf since there are only 40 counts
[Wed May 15 08:05:28 2013] rmf not generated due to insufficient counts
[Wed May 15 08:05:28 2013] fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Wed May 15 08:06:30 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:30 2013] Total counts from fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 119.00
[Wed May 15 08:06:30 2013] Total counts from fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_bgd.pi.gz = 869.00
[Wed May 15 08:06:30 2013] Got source and background scale factors 1023642.000000, 10259534.000000
[Wed May 15 08:06:30 2013] User source parameters:
  Position = (221.4, 256.8) = 0 54 50.74 -73 34 16.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.3 +/- 11.9
  Background aperture counts = 86.7
  Rate = 0.0008 +/- 0.0003

[Wed May 15 08:06:30 2013] Updating counts from extracted products
[Wed May 15 08:06:30 2013] Set source signif. to 32.30/9.31 = 3.47
[Wed May 15 08:06:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:31 2013] Using photon index=1.80, rate=0.000775, arf fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15.arf
[Wed May 15 08:06:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:31 2013] Updating source flux to 1.9e-14
[Wed May 15 08:06:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:38 2013] xmm0601213001/analysis//spectral/fullrun_mos2_xmm0601213001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete