[Wed May 15 07:50:52 2013] Detection parameters:
  Position = (461.8, 208.8) = 0 50 43.70 -73 37 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.7 +/- 12.1
  Background counts = 16.9
  Rate = 0.002 +/- 0.0003

[Wed May 15 07:50:53 2013] Off-axis axis estimate = 13.51'
[Wed May 15 07:51:25 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:25 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Wed May 15 07:51:25 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.983
[Wed May 15 07:51:25 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 13.18"
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src9.csv
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src9.csv
[Wed May 15 07:51:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:26 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 15 07:51:26 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 15 07:51:26 2013] Fit fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed May 15 07:51:43 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.319054 pixels away
[Wed May 15 07:51:43 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:43 2013] Assessing source extent using major
[Wed May 15 07:51:43 2013] Source does appear to be extended
[Wed May 15 07:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:05 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:05 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Wed May 15 07:52:05 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.983
[Wed May 15 07:52:05 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 13.18"
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src9.csv
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src9.csv
[Wed May 15 07:52:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 15 07:52:06 2013] Fit fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May 15 07:52:21 2013] Spatial fit model total counts = 270.341000, observed total counts = 269.000000
[Wed May 15 07:52:21 2013] Offset between fit and detection position for source 9 = 0.309156 pixels
[Wed May 15 07:52:21 2013] 270.828500 total counts/ 226.249000 bgd. counts: snr = 2.963752
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.309156 pixels
  Position = (461.5, 208.7) = 0 50 44.01 -73 37 45.4
  Extent = 4.4 (3.3-6.0)", rotation angle = 0
  Source counts = 44.6 +/- 16.5
  Background counts = 226.2
  Rate = 0.001 +/- 0.0004
[Wed May 15 07:52:21 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:21 2013] Assessing source extent using major axis lower bound
[Wed May 15 07:52:21 2013] Source does appear to be extended
[Wed May 15 07:52:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:53 2013] XMMSAS src. selection expression = ellipse(40101.990000, 18107.029600, 262.422608, 262.422608, 0.000000, X, Y)
[Wed May 15 07:52:53 2013] Not overwriting source region fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9_src.reg
[Wed May 15 07:52:53 2013] Extracting stamp from image fullrun_mos1_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (446, 194) - (477, 224)
[Wed May 15 07:52:53 2013] XMMSAS bgd. selection expression = annulus(40101.990000, 18107.029600, 437.371013, 874.742025, X, Y)
[Wed May 15 07:52:53 2013] Writing fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9.gif
[Wed May 15 07:54:44 2013] Mean detx,y = (14703.43, 340.66) 
[Wed May 15 07:54:46 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 07:54:57 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 07:54:57 2013] Setting source spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 15 07:54:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 15 08:04:49 2013] Not generating rmf since there are only 44 counts
[Wed May 15 08:04:49 2013] rmf not generated due to insufficient counts
[Wed May 15 08:06:27 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:27 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 65.00
[Wed May 15 08:06:27 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9_bgd.pi.gz = 160.00
[Wed May 15 08:06:27 2013] Got source and background scale factors 219200.000000, 1750148.000000
[Wed May 15 08:06:27 2013] User source parameters:
  Position = (461.5, 208.7) = 0 50 44.01 -73 37 45.4
  Extent = 4.4 (3.3-6.0)", rotation angle = 0
  Source aperture counts = 45.0 +/- 9.1
  Background aperture counts = 20.0
  Rate = 0.001 +/- 0.0002

[Wed May 15 08:06:27 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:27 2013] Using photon index=1.80, rate=0.00107, arf fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9.arf
[Wed May 15 08:06:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:27 2013] Updating source flux to 4.9e-14
[Wed May 15 08:06:33 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 08:06:35 2013] xmm0601213001/analysis//spectral/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete