[Wed May 15 07:50:52 2013] Detection parameters:
  Position = (437.0, 429.9) = 0 51 11.49 -73 21 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.4 +/- 20.2
  Background counts = 18.4
  Rate = 0.006 +/- 0.0005

[Wed May 15 07:50:53 2013] Off-axis axis estimate = 13.85'
[Wed May 15 07:51:25 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:25 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Wed May 15 07:51:25 2013] source mask rpix=3.1, npix_max = 50, mask sum = 51, frac = 1.001
[Wed May 15 07:51:25 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.35"
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 07:51:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 15 07:51:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:43 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Wed May 15 07:51:43 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:43 2013] Assessing source extent using major
[Wed May 15 07:51:43 2013] Source does appear to be extended
[Wed May 15 07:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:51:43 2013] Source is confused with source 4
[Wed May 15 07:52:05 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:05 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Wed May 15 07:52:05 2013] source mask rpix=3.1, npix_max = 50, mask sum = 51, frac = 1.001
[Wed May 15 07:52:05 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 13.35"
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 07:52:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 15 07:52:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:21 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Wed May 15 07:52:21 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:21 2013] Assessing source extent using major
[Wed May 15 07:52:21 2013] Source does appear to be extended
[Wed May 15 07:52:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:53 2013] XMMSAS src. selection expression = ellipse(37966.376740, 37354.631439, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 07:52:53 2013] Not overwriting source region fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src.reg
[Wed May 15 07:52:53 2013] Extracting stamp from image fullrun_mos1_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (399, 392) - (474, 467)
[Wed May 15 07:52:53 2013] XMMSAS bgd. selection expression = annulus(37966.376740, 37354.631439, 1087.500000, 2175.000000, X, Y) && !ellipse(37760.746000, 37708.830000, 2099.504060, 2099.504060, 0.000000, X, Y) && !ellipse(37164.515411, 37383.348236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37104.440063, 38100.811493, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 07:52:53 2013] Writing fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2.gif
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/events/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0601213001/products/events/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed May 15 07:52:54 2013] Mean detx,y = (5165.77, -16578.17) 
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/images/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src.img and ../../xmm0601213001/products/images/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/spectra/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed May 15 07:52:54 2013] Setting source spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 15 07:52:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/lightcurves/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed May 15 08:04:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 08:04:13 2013] rmf not generated due to insufficient counts
[Wed May 15 08:06:26 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:26 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 617.00
[Wed May 15 08:06:26 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_bgd.pi.gz = 133.00
[Wed May 15 08:06:26 2013] Got source and background scale factors 1050892.000000, 1262634.000000
[Wed May 15 08:06:26 2013] User source parameters:
  Position = (437.0, 429.9) = 0 51 11.49 -73 21 44.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 506.3 +/- 25.9
  Background aperture counts = 110.7
  Rate = 0.01 +/- 0.0006

[Wed May 15 08:06:26 2013] Updating counts from extracted products
[Wed May 15 08:06:26 2013] Set source signif. to 506.30/10.52 = 48.12
[Wed May 15 08:06:27 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:27 2013] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2.arf
[Wed May 15 08:06:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:27 2013] Updating source flux to 7.5e-13
[Wed May 15 08:06:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:35 2013] xmm0601213001/analysis//spectral/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete