[Wed May 15 07:50:53 2013] Detection parameters:
  Position = (293.4, 102.7) = 0 53 37.00 -73 45 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.1 +/- 10.0
  Background counts = 13.8
  Rate = 0.001 +/- 0.0002

[Wed May 15 07:50:53 2013] Off-axis axis estimate = 14.19'
[Wed May 15 07:51:25 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 07:51:25 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Wed May 15 07:51:25 2013] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.902
[Wed May 15 07:51:25 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.53"
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src13.csv
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 15 07:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src13.csv
[Wed May 15 07:51:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:51:26 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 15 07:51:26 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 15 07:51:26 2013] Fit fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed May 15 07:51:38 2013] Warning, spatial fit 24 centroid is now closest to src. 23
[Wed May 15 07:51:43 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 17.112729 pixels away
[Wed May 15 07:51:43 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:43 2013] Assessing source extent using major
[Wed May 15 07:51:43 2013] Source does appear to be extended
[Wed May 15 07:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:51:50 2013] Warning, spatial fit 24 centroid is now closest to src. 21
[Wed May 15 07:52:05 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:05 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Wed May 15 07:52:05 2013] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.902
[Wed May 15 07:52:05 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.53"
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src13.csv
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src13.csv
[Wed May 15 07:52:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 15 07:52:06 2013] Fit fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed May 15 07:52:21 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.305562 pixels away
[Wed May 15 07:52:21 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:21 2013] Assessing source extent using major
[Wed May 15 07:52:21 2013] Source does appear to be extended
[Wed May 15 07:52:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:28 2013] Warning, spatial fit 19 centroid is now closest to src. 20
[Wed May 15 07:52:53 2013] XMMSAS src. selection expression = ellipse(25477.710999, 8887.672157, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 07:52:53 2013] Not overwriting source region fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13_src.reg
[Wed May 15 07:52:53 2013] Extracting stamp from image fullrun_mos1_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (256, 65) - (331, 140)
[Wed May 15 07:52:53 2013] XMMSAS bgd. selection expression = annulus(25477.710999, 8887.672157, 1087.500000, 2175.000000, X, Y)
[Wed May 15 07:52:53 2013] Writing fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13.gif
[Wed May 15 07:55:56 2013] Mean detx,y = (4810.18, 14508.36) 
[Wed May 15 07:55:57 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 07:56:31 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 07:56:31 2013] Setting source spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 15 07:56:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 15 08:05:18 2013] Not generating rmf since there are only 42 counts
[Wed May 15 08:05:18 2013] rmf not generated due to insufficient counts
[Wed May 15 08:06:27 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:27 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 136.00
[Wed May 15 08:06:27 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13_bgd.pi.gz = 816.00
[Wed May 15 08:06:27 2013] Got source and background scale factors 1268120.000000, 8304582.000000
[Wed May 15 08:06:27 2013] User source parameters:
  Position = (293.4, 102.7) = 0 53 37.00 -73 45 30.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 11.4 +/- 12.7
  Background aperture counts = 124.6
  Rate = 0.0003 +/- 0.0003

[Wed May 15 08:06:27 2013] Updating counts from extracted products
[Wed May 15 08:06:27 2013] Set source signif. to 11.40/11.16 = 1.02
[Wed May 15 08:06:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:28 2013] Using photon index=1.80, rate=0.000273, arf fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13.arf
[Wed May 15 08:06:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:28 2013] Updating source flux to 8.1e-15
[Wed May 15 08:06:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 08:06:35 2013] xmm0601213001/analysis//spectral/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete