[Wed May 15 07:50:52 2013] Detection parameters:
  Position = (310.2, 174.7) = 0 53 19.65 -73 40 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 13.3
  Background counts = 18.1
  Rate = 0.003 +/- 0.0005

[Wed May 15 07:50:53 2013] Off-axis axis estimate = 9.01'
[Wed May 15 07:51:25 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:51:25 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Wed May 15 07:51:25 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Wed May 15 07:51:25 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.93"
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 15 07:51:25 2013] Fit fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 15 07:51:25 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 15 07:51:25 2013] Fit fullrun_mos1_xmm0601213001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed May 15 07:51:43 2013] Spatial fit model total counts = 265.771000, observed total counts = 254.000000
[Wed May 15 07:51:43 2013] Offset between fit and detection position for source 10 = 0.155797 pixels
[Wed May 15 07:51:43 2013] 264.769900 total counts/ 200.269000 bgd. counts: snr = 4.557838
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.155797 pixels
  Position = (310.1, 174.5) = 0 53 19.71 -73 40 18.0
  Extent = 5.0 (3.8-6.4)", rotation angle = 0
  Source counts = 64.5 +/- 16.3
  Background counts = 200.3
  Rate = 0.002 +/- 0.0004
[Wed May 15 07:51:43 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:51:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:51:43 2013] Assessing source extent using major axis lower bound
[Wed May 15 07:51:43 2013] Source does appear to be extended
[Wed May 15 07:51:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 07:52:05 2013] Initial guess for spatial extent in simple fitting = 4.98"
[Wed May 15 07:52:05 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.107
[Wed May 15 07:52:05 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 4.98"
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src4.csv
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src4.csv
[Wed May 15 07:52:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 15 07:52:06 2013] fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 15 07:52:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 15 07:52:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601213001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:52:21 2013] Warning, spatial fit 4 centroid is now closest to src. 8
[Wed May 15 07:52:21 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:52:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:52:21 2013] Assessing source extent using major axis lower bound
[Wed May 15 07:52:21 2013] Source does appear to be extended
[Wed May 15 07:52:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:52:53 2013] XMMSAS src. selection expression = ellipse(26934.007400, 15136.448600, 299.079609, 299.079609, 0.000000, X, Y)
[Wed May 15 07:52:53 2013] Not overwriting source region fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src.reg
[Wed May 15 07:52:53 2013] Extracting stamp from image fullrun_mos1_xmm0601213001_pi300-10000_cl_sm2.00.img.gz, (293, 157) - (327, 192)
[Wed May 15 07:52:53 2013] XMMSAS bgd. selection expression = annulus(26934.007400, 15136.448600, 498.466014, 996.932029, X, Y)
[Wed May 15 07:52:53 2013] Writing fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10.gif
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/events/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0601213001/products/events/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed May 15 07:52:54 2013] Mean detx,y = (3712.42, 8163.21) 
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/images/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src.img and ../../xmm0601213001/products/images/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/spectra/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0601213001/products/spectra/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed May 15 07:52:54 2013] Setting source spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May 15 07:52:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed May 15 07:52:54 2013] ../../xmm0601213001/products/lightcurves/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0601213001/products/lightcurves/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed May 15 08:04:23 2013] Not generating rmf since there are only 64 counts
[Wed May 15 08:04:23 2013] rmf not generated due to insufficient counts
[Wed May 15 08:06:26 2013] Updating aperture counts using extracted products
[Wed May 15 08:06:26 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 92.00
[Wed May 15 08:06:26 2013] Total counts from fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_bgd.pi.gz = 219.00
[Wed May 15 08:06:26 2013] Got source and background scale factors 280000.000000, 2152108.000000
[Wed May 15 08:06:26 2013] User source parameters:
  Position = (310.1, 174.5) = 0 53 19.71 -73 40 18.0
  Extent = 5.0 (3.8-6.4)", rotation angle = 0
  Source aperture counts = 63.5 +/- 10.6
  Background aperture counts = 28.5
  Rate = 0.002 +/- 0.0003

[Wed May 15 08:06:27 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 08:06:27 2013] Using photon index=1.80, rate=0.00155, arf fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10.arf
[Wed May 15 08:06:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 08:06:27 2013] Updating source flux to 3.7e-14
[Wed May 15 08:06:33 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 08:06:35 2013] xmm0601213001/analysis//spectral/fullrun_mos1_xmm0601213001_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete