[Tue Mar 13 23:04:57 2012] Detection parameters:
  Position = (189.4, 263.0) = 1 10 3.19 -73 13 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.4 +/- 9.6
  Background counts = 16.2
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 23:04:57 2012] Off-axis axis estimate = 8.31'
[Wed Mar 14 02:57:48 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 02:57:48 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Mar 14 02:57:48 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Wed Mar 14 02:57:48 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 10.59"
[Wed Mar 14 04:52:07 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_src43.ximg exists
[Wed Mar 14 04:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_src43.csv
[Wed Mar 14 04:52:07 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Mar 14 04:52:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_src43.csv
[Wed Mar 14 04:52:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 04:52:08 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Mar 14 04:52:08 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Mar 14 04:52:08 2012] Fit fullrun_mos1_xmm0601212701_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Mar 14 05:28:05 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 10.154324 pixels away
[Wed Mar 14 05:28:05 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:28:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:28:05 2012] Assessing source extent using major
[Wed Mar 14 05:28:05 2012] Source does appear to be extended
[Wed Mar 14 05:28:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 08:37:41 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 08:37:41 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Mar 14 08:37:41 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Wed Mar 14 08:37:41 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 10.59"
[Wed Mar 14 10:49:48 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass1_src40.ximg exists
[Wed Mar 14 10:49:48 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed Mar 14 10:49:48 2012] Fit fullrun_mos1_xmm0601212701_pi300-10000_cl_pass1_src40 appears to have run properly
[Wed Mar 14 10:49:49 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed Mar 14 10:49:49 2012] fullrun_mos1_xmm0601212701_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed Mar 14 10:49:49 2012] Fit fullrun_mos1_xmm0601212701_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Wed Mar 14 11:27:01 2012] Source 38 is offset by -8.885761 and 4.041138 pixels which is larger than
2 X fitted extent = 3.284244 x 1.216772, not incorporating fit results
[Wed Mar 14 11:27:01 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 11:27:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 11:27:01 2012] Assessing source extent using major
[Wed Mar 14 11:27:01 2012] Source does appear to be extended
[Wed Mar 14 11:27:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 13:53:43 2012] XMMSAS src. selection expression = ellipse(16425.340820, 22834.855011, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 13:53:43 2012] Writing source region out to fullrun_mos1_xmm0601212701_pi300-10000_pass1_cl_src38_src.reg
[Wed Mar 14 13:53:43 2012] Extracting stamp from image fullrun_mos1_xmm0601212701_pi300-10000_cl_sm2.00.img.gz, (152, 226) - (227, 301)
[Wed Mar 14 13:53:43 2012] XMMSAS bgd. selection expression = annulus(16425.340820, 22834.855011, 1087.500000, 2175.000000, X, Y) && !ellipse(14306.222533, 25074.601768, 1364.892457, 220.159097, 44.565657, X, Y) && !ellipse(16232.803660, 22197.678400, 454.914413, 454.914413, 0.000000, X, Y) && !ellipse(15117.665878, 20149.908844, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 13:53:43 2012] Writing fullrun_mos1_xmm0601212701_pi300-10000_pass1_cl_src38.gif
[Wed Mar 14 14:17:50 2012] Mean detx,y = (-7380.56, -9378.80) 
[Wed Mar 14 14:17:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 14:18:07 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 14:18:07 2012] Setting source spectrum file to fullrun_mos1_xmm0601212701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 14 14:18:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601212701_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Mar 14 15:05:59 2012] Not generating rmf since there are only 41 counts
[Wed Mar 14 15:05:59 2012] rmf not generated due to insufficient counts
[Wed Mar 14 15:29:49 2012] Updating aperture counts using extracted products
[Wed Mar 14 15:29:49 2012] Error reading totcts from fullrun_mos1_xmm0601212701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 14 15:29:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 15:29:51 2012] Using photon index=1.80, rate=0.00113, arf fullrun_mos1_xmm0601212701_pi300-10000_pass1_cl_src38.arf
[Wed Mar 14 15:29:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 15:29:51 2012] Updating source flux to 2.5e-14
[Wed Mar 14 15:29:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting