[Wed May 16 00:29:45 2012] Detection parameters:
  Position = (281.2, 189.9) = 1 8 33.38 -73 1 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.1 +/- 12.4
  Background counts = 20.2
  Rate = 0.005 +/- 0.0007

[Wed May 16 00:29:45 2012] Off-axis axis estimate = 7.97'
[Wed May 16 01:01:07 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Wed May 16 01:01:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 01:01:07 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Wed May 16 01:01:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.045
[Wed May 16 01:01:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.41"
[Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 16 01:18:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src3.csv
[Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 16 01:18:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src3.csv
[Wed May 16 01:18:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 16 01:18:25 2012] Fit fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 16 02:32:16 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.681887 pixels away
[Wed May 16 02:32:16 2012] Vigneting correction estimate = 1.000000
[Wed May 16 02:32:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 02:32:16 2012] Assessing source extent using major
[Wed May 16 02:32:16 2012] Source does appear to be extended
[Wed May 16 02:32:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 03:03:03 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Wed May 16 03:03:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 03:03:03 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Wed May 16 03:03:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.045
[Wed May 16 03:03:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.41"
[Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 16 03:20:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src3.csv
[Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 16 03:20:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src3.csv
[Wed May 16 03:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 16 03:20:10 2012] Fit fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 16 04:27:50 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.681614 pixels away
[Wed May 16 04:27:50 2012] Vigneting correction estimate = 1.000000
[Wed May 16 04:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 04:27:50 2012] Assessing source extent using major
[Wed May 16 04:27:50 2012] Source does appear to be extended
[Wed May 16 04:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 04:51:27 2012] XMMSAS src. selection expression = ellipse(24412.061890, 16474.907562, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 16 04:51:27 2012] Writing source region out to fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src6_src.reg
[Wed May 16 04:51:27 2012] Extracting stamp from image fullrun_mos1_xmm0601212601_pi300-10000_cl_sm2.00.img.gz, (244, 152) - (319, 227)
[Wed May 16 04:51:27 2012] XMMSAS bgd. selection expression = annulus(24412.061890, 16474.907562, 1087.500000, 2175.000000, X, Y)
[Wed May 16 04:51:27 2012] Writing fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src6.gif
[Wed May 16 04:52:13 2012] Mean detx,y = (8108.94, -2268.64) 
[Wed May 16 04:52:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 04:52:46 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 04:52:47 2012] Setting source spectrum file to fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 16 04:52:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 16 05:05:11 2012] Not generating rmf since there are only 83 counts
[Wed May 16 05:05:11 2012] rmf not generated due to insufficient counts
[Wed May 16 05:45:38 2012] Updating aperture counts using extracted products
[Wed May 16 05:45:38 2012] Error reading totcts from fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 16 05:45:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 05:45:38 2012] Using photon index=1.80, rate=0.00475, arf fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src6.arf
[Wed May 16 05:45:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 05:45:38 2012] Updating source flux to 7e-14
[Wed May 16 05:45:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting