[Wed May 16 00:29:45 2012] Detection parameters: Position = (163.8, 330.2) = 1 10 28.62 -72 51 13.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 61.5 +/- 11.5 Background counts = 17.6 Rate = 0.004 +/- 0.0007 [Wed May 16 00:29:45 2012] Off-axis axis estimate = 10.03' [Wed May 16 01:01:07 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting [Wed May 16 01:01:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 16 01:01:07 2012] Initial guess for spatial extent in simple fitting = 11.44" [Wed May 16 01:01:07 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918 [Wed May 16 01:01:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.44" [Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src5.ximg exists [Wed May 16 01:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src5.csv [Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 16 01:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src5.csv [Wed May 16 01:18:25 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 16 01:18:25 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 16 01:18:25 2012] Fit fullrun_mos1_xmm0601212601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Wed May 16 02:32:16 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.956746 pixels away [Wed May 16 02:32:16 2012] Vigneting correction estimate = 1.000000 [Wed May 16 02:32:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 16 02:32:16 2012] Assessing source extent using major [Wed May 16 02:32:16 2012] Source does appear to be extended [Wed May 16 02:32:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 16 03:03:03 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting [Wed May 16 03:03:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 16 03:03:03 2012] Initial guess for spatial extent in simple fitting = 11.44" [Wed May 16 03:03:03 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918 [Wed May 16 03:03:03 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.44" [Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src5.ximg exists [Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src5_1.ximg exists [Wed May 16 03:20:10 2012] Fit fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_src5 appears to have run properly [Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed May 16 03:20:10 2012] fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 16 03:20:10 2012] Fit fullrun_mos1_xmm0601212601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Wed May 16 04:27:50 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.957794 pixels away [Wed May 16 04:27:50 2012] Vigneting correction estimate = 1.000000 [Wed May 16 04:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 16 04:27:50 2012] Assessing source extent using major [Wed May 16 04:27:50 2012] Source does appear to be extended [Wed May 16 04:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 16 04:51:27 2012] XMMSAS src. selection expression = ellipse(14205.016815, 28680.212646, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 16 04:51:27 2012] Writing source region out to fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src2_src.reg [Wed May 16 04:51:27 2012] Extracting stamp from image fullrun_mos1_xmm0601212601_pi300-10000_cl_sm2.00.img.gz, (126, 293) - (201, 368) [Wed May 16 04:51:27 2012] XMMSAS bgd. selection expression = annulus(14205.016815, 28680.212646, 1087.500000, 2175.000000, X, Y) [Wed May 16 04:51:27 2012] Writing fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src2.gif [Wed May 16 04:53:29 2012] Mean detx,y = (-1092.24, 10689.75) [Wed May 16 04:53:31 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 16 04:54:12 2012] Binned source spectrum to 10 counts/bin [Wed May 16 04:54:12 2012] Setting source spectrum file to fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed May 16 04:54:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src2_bgd.pi.gz [Wed May 16 05:05:27 2012] Not generating rmf since there are only 61 counts [Wed May 16 05:05:27 2012] rmf not generated due to insufficient counts [Wed May 16 05:45:38 2012] Updating aperture counts using extracted products [Wed May 16 05:45:38 2012] Error reading totcts from fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed May 16 05:45:38 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 16 05:45:38 2012] Using photon index=1.80, rate=0.00363, arf fullrun_mos1_xmm0601212601_pi300-10000_pass1_cl_src2.arf [Wed May 16 05:45:38 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 16 05:45:38 2012] Updating source flux to 5.6e-14 [Wed May 16 05:45:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting