[Wed Jul  4 09:34:59 2012] Detection parameters:
  Position = (256.0, 187.8) = 1 13 23.71 -73 24 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.4 +/- 16.5
  Background counts = 45.9
  Rate = 0.007 +/- 0.0009

[Wed Jul  4 09:34:59 2012] Off-axis axis estimate = 8.59'
[Wed Jul  4 09:36:47 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 09:36:47 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Wed Jul  4 09:36:47 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Wed Jul  4 09:36:47 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.73"
[Wed Jul  4 09:55:45 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jul  4 09:55:45 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jul  4 09:55:45 2012] Fit fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_src21 appears to have run properly
[Wed Jul  4 09:55:45 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jul  4 09:55:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed Jul  4 09:55:45 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jul  4 09:55:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed Jul  4 09:55:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:29:03 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 15.057308 pixels away
[Wed Jul  4 11:29:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:29:03 2012] Assessing source extent using major
[Wed Jul  4 11:29:03 2012] Source does appear to be extended
[Wed Jul  4 11:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 11:29:20 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:29:20 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Wed Jul  4 11:29:20 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Wed Jul  4 11:29:20 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.73"
[Wed Jul  4 11:59:02 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_src21.ximg exists
[Wed Jul  4 11:59:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_src21.csv
[Wed Jul  4 11:59:02 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Jul  4 11:59:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_src21.csv
[Wed Jul  4 11:59:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:59:03 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Jul  4 11:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed Jul  4 11:59:03 2012] fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Jul  4 11:59:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed Jul  4 11:59:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 13:24:00 2012] Spatial fit model total counts = 639.614000, observed total counts = 503.000000
[Wed Jul  4 13:24:00 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  4 13:24:00 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:24:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:24:00 2012] Assessing source extent using major
[Wed Jul  4 13:24:00 2012] Source does appear to be extended
[Wed Jul  4 13:24:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 13:24:11 2012] XMMSAS src. selection expression = ellipse(22219.832077, 16287.648346, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul  4 13:24:11 2012] Writing source region out to fullrun_pn_xmm0601212501_pi300-10000_pass1_cl_src22_src.reg
[Wed Jul  4 13:24:11 2012] Extracting stamp from image fullrun_pn_xmm0601212501_pi300-10000_cl_sm2.00.img.gz, (218, 150) - (293, 225)
[Wed Jul  4 13:24:11 2012] XMMSAS bgd. selection expression = annulus(22219.832077, 16287.648346, 1087.500000, 2175.000000, X, Y) && !ellipse(19431.436676, 16754.296295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19651.389923, 13521.665375, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 13:24:11 2012] Writing fullrun_pn_xmm0601212501_pi300-10000_pass1_cl_src22.gif
[Wed Jul  4 13:37:25 2012] Mean detx,y = (9146.16, -423.96) 
[Wed Jul  4 13:37:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 13:38:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 13:38:00 2012] Setting source spectrum file to fullrun_pn_xmm0601212501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jul  4 13:38:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601212501_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jul  4 13:49:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul  4 13:49:57 2012] rmf not generated due to insufficient counts
[Wed Jul  4 14:30:36 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:30:36 2012] Error reading totcts from fullrun_pn_xmm0601212501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jul  4 14:30:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:30:36 2012] Using photon index=1.80, rate=0.00712, arf fullrun_pn_xmm0601212501_pi300-10000_pass1_cl_src22.arf
[Wed Jul  4 14:30:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:30:36 2012] Updating source flux to 2.7e-14
[Wed Jul  4 14:31:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting