[Wed Jul  4 09:35:26 2012] Detection parameters:
  Position = (136.3, 213.2) = 1 15 24.93 -73 22 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 12.1
  Background counts = 13.0
  Rate = 0.002 +/- 0.0004

[Wed Jul  4 09:35:27 2012] Off-axis axis estimate = 13.28'
[Wed Jul  4 11:04:21 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:04:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 11:04:21 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Wed Jul  4 11:04:21 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Wed Jul  4 11:04:21 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.07"
[Wed Jul  4 11:28:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jul  4 11:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_src11.csv
[Wed Jul  4 11:28:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jul  4 11:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_src11.csv
[Wed Jul  4 11:28:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:28:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jul  4 11:28:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jul  4 11:28:56 2012] Fit fullrun_mos2_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jul  4 11:29:12 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.195792 pixels away
[Wed Jul  4 11:29:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:29:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:29:12 2012] Assessing source extent using major
[Wed Jul  4 11:29:12 2012] Source does appear to be extended
[Wed Jul  4 11:29:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 12:58:47 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 12:58:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 12:58:47 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Wed Jul  4 12:58:47 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Wed Jul  4 12:58:47 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.07"
[Wed Jul  4 13:23:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jul  4 13:23:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_src11.csv
[Wed Jul  4 13:23:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jul  4 13:23:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_src11.csv
[Wed Jul  4 13:23:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 13:23:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jul  4 13:23:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Jul  4 13:23:56 2012] fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jul  4 13:23:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Jul  4 13:23:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 13:24:04 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.322752 pixels away
[Wed Jul  4 13:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:24:04 2012] Assessing source extent using major
[Wed Jul  4 13:24:04 2012] Source does appear to be extended
[Wed Jul  4 13:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 14:12:49 2012] XMMSAS src. selection expression = ellipse(11813.541656, 18501.123703, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul  4 14:12:49 2012] Writing source region out to fullrun_mos2_xmm0601212501_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul  4 14:12:49 2012] Extracting stamp from image fullrun_mos2_xmm0601212501_pi300-10000_cl_sm2.00.img.gz, (99, 176) - (174, 251)
[Wed Jul  4 14:12:49 2012] XMMSAS bgd. selection expression = annulus(11813.541656, 18501.123703, 1087.500000, 2175.000000, X, Y)
[Wed Jul  4 14:12:49 2012] Writing fullrun_mos2_xmm0601212501_pi300-10000_pass1_cl_src2.gif
[Wed Jul  4 14:15:13 2012] Mean detx,y = (-12588.17, -9631.32) 
[Wed Jul  4 14:15:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 14:15:23 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 14:15:23 2012] Setting source spectrum file to fullrun_mos2_xmm0601212501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul  4 14:15:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601212501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul  4 14:28:52 2012] Not generating rmf since there are only 81 counts
[Wed Jul  4 14:28:52 2012] rmf not generated due to insufficient counts
[Wed Jul  4 14:30:37 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:30:37 2012] Error reading totcts from fullrun_mos2_xmm0601212501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul  4 14:30:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:30:37 2012] Using photon index=1.80, rate=0.00243, arf fullrun_mos2_xmm0601212501_pi300-10000_pass1_cl_src2.arf
[Wed Jul  4 14:30:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:30:37 2012] Updating source flux to 5.8e-14
[Wed Jul  4 14:31:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting